Talk:Bills horse troughs

Australia Low‑importance

	Australia portal Bills horse troughs is within the scope of WikiProject Australia, which aims to improve Wikipedia's coverage of Australia and Australia-related topics. If you would like to participate, visit the project page.AustraliaWikipedia:WikiProject AustraliaTemplate:WikiProject AustraliaAustralia articles
Low	This article has been rated as Low-importance on the project's importance scale.
	Need help improving this article? Ask a Librarian^{What's this?} at the National Library of Australia.
	The Wikimedia Australia chapter can be contacted via email to helpwikimedia.org.au for non-editorial assistance.

External links modified

Hello fellow Wikipedians,

I have just modified one external link on Bills horse troughs. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:

Added archive https://web.archive.org/web/20060514175020/http://www.webdotwiz.com/billshorsetroughs/index5.htm to http://www.webdotwiz.com/billshorsetroughs/index5.htm

When you have finished reviewing my changes, you may follow the instructions on the template below to fix any issues with the URLs.

This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 5 June 2024).

If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—InternetArchiveBot (Report bug) 11:48, 20 July 2017 (UTC)[reply]

Wire mattress

Inner-spring mattresses are now commonplace and so comfortable that wire mattresses are forgotten, but 80 years ago they were the norm. Some had an array of spiral springs at one end, pulling a wire mesh; others had spiral springs all round the wire mesh, like a modern trampoline and, needless to say, both sagged in the middle when occupied. This was topped with a fabric envelope packed with a lightweight material such as straw, kapok fibre or feathers, for comfort and warmth. Another type consisted of a large number of a woven mesh of long thin spiral springs, emmeshed and stretching the length of the bed. The timber "runners" on each side of the bed needed to be substantial, as were the timbers at the end, which had to withstand considerable tension. There were two parallel timbers at one end connected by a pair of steel bolts, which provided adjustment. Needless to say this type was more expensive, but popular because it did not squeak when the occupant/s shifted their weight. Was this the kind manufactured by Busst & Bills Brothers of Kent Street, Sydney ? Doug butler (talk) 04:52, 14 September 2024 (UTC)[reply]

According to the newspaper article, the remaining Bills Brothers, Richard and Walter, partnered with William A. Buesst to found BBB, with a factory in Melbourne. They diversified to manufacture kapok mattresses and later developed inner-spring mattresses. In 1951 the old wire-weaving machinery was still held at the factory. Doug butler (talk) 22:47, 14 September 2024 (UTC)[reply]