SCSI check condition
It is proposed that this article be deleted because of the following concern:
If you can address this concern by improving, copyediting, sourcing, renaming, or merging the page, please edit this page and do so. You may remove this message if you improve the article or otherwise object to deletion for any reason. Although not required, you are encouraged to explain why you object to the deletion, either in your edit summary or on the talk page. If this template is removed, do not replace it. The article may be deleted if this message remains in place for seven days, i.e., after 18:46, 25 November 2024 (UTC). Find sources: "SCSI check condition" – news · newspapers · books · scholar · JSTOR |
The topic of this article may not meet Wikipedia's general notability guideline. (November 2017) |
In computer terminology, a Check Condition occurs when a SCSI device needs to report an error.
SCSI communication takes place between an initiator and a target. The initiator sends a command to the target which then responds. SCSI commands are sent in a Command Descriptor Block (CDB). At the end of the command the target returns a Status Code byte which is usually 00h for success, 02h for a Check Condition (error), or 08h for busy.
When the target returns a Check Condition in response to a command, the initiator usually then issues a SCSI Request Sense command in order to obtain more information. During the time between the reporting of a Check Condition and the issuing of a Request Sense command, the target is in a special state called a Contingent Allegiance Condition.