Lubber Run Fill
 | It has been suggested that this article be merged with Waltz & Reece Cut, Armstrong Cut, Bradbury Fill, Colby Cut, Jones Cut, Vail Fill, Ramsey Fill, Pequest Fill, McMickle Cut (Lackawanna Cut-Off), Wharton Fill and Slateford Junction to Lackawanna Cut-Off. (Discuss) Proposed since September 2024. |
Lubber Run Fill is a fill on the Lackawanna Cut-Off railroad line in northwest New Jersey. Located between mileposts 50.1 and 50.5 in Byram Township, it was built between 1908 and 1911 by contractor Waltz & Reece Construction Company. It is 0.40 miles (0.64 km) long, has an average height of 64 feet (20 m), and a maximum height of 98 feet (30 m). Most of its 720,000 cubic yards (550500 m3) of fill material was excavated from the surrounding low-lying area.
Lubber Run Fill is named for the Lubbers Run (the "s" was added to the stream's name sometime after the construction of the Cut-Off), which passes under the fill.[1] A dam was built under the fill on the north side of the embankment, creating Dallis Pond, which flows into Lake Lackawanna.
Lubber Run Fill supports a tangent (straight) section of right-of-way that permits speeds of 70 mph (113 km/h). It sits just east of Wharton Fill and just west of Bradbury Fill.[2]
A single track is to be relaid across the fill as part of the reactivation of the Cut-Off, which was abandoned in 1983. NJ Transit rail service is projected to begin no earlier than 2026.
References
[edit]- ^ 1906 Survey Map of the Hopatcong-Slateford Cut-Off, September 1, 1906.
- ^ Taber, Thomas Townsend; Taber, Thomas Townsend III (1980). The Delaware, Lackawanna & Western Railroad in the Twentieth Century 1, p. 35. Muncy, PA: Privately printed. ISBN 0-9603398-2-5.