Jump to content

Auk oilfield

Coordinates: 56°24′00″N 02°04′00″E / 56.40000°N 2.06667°E / 56.40000; 2.06667
From Wikipedia, the free encyclopedia

Auk oilfield
Auk oilfield is located in North Sea
Auk oilfield
Location of Auk oilfield
CountryScotland, United Kingdom
LocationNorth Sea
Block30/16
Offshore/onshoreoffshore
Coordinates56°24′00″N 02°04′00″E / 56.40000°N 2.06667°E / 56.40000; 2.06667
OperatorRepsol Sinopec Resources UK Ltd
Field history
DiscoveryOctober 1970
Start of production1975
Production
Estimated oil in place88.5 million barrels (~1.21×10^7 t)

The Auk Oilfield is situated 249 kilometres (155 mi) east, southeast of Aberdeen, Scotland, in block number 30/16.

Reservoir

[edit]

It was discovered in October 1970 in a water depth of 182 metres. The oil reservoir is a Rotliegendes sandstone overlaid with Zechstein carbonates and ls located at a depth of 2,316 metres (7,598 ft).[1] Estimated ultimate recovery is 88.5 million barrels (14.07×10^6 m3) of oil. The oil has an API gravity of 38 degrees and a gas-oil-ratio of 155 scf/bbl.

Infrastructure

[edit]

The Auk 'A' platform was a steel, 8 legged jacket designed by Shell Oil and constructed at Methil, Fife, Scotland. The jacket weighs 3,414 tonnes, it was installed in July 1974 and supported a topside weight of around 8,000 tonnes.

Operator

[edit]

It was operated by Shell UK Exploration and Production Ltd, in 50% partnership with Esso until October 2006 when it was bought by Talisman Energy, and is now licensed by Repsol Sinopec Resources UK Ltd.[2]

The field is named after the Auk a family of sea birds. Myles Bowen, Shell's Exploration Manager in 1970, had a keen interest in ornithology and began the naming convention of birds.[3] There is an (entirely fanciful) legend that it was to be called A UK, as the first British oilfield, until somebody realised that the sixth field would be called F UK and Shell's policy was rapidly changed to name their fields after sea birds. Shells sixth UK oilfield is called Fulmar.

Production

[edit]

Production started in December 1975 from the Auk 'A' platform.

The topsides facilities included capability to drill, produce meter and pump oil. There were 10 well slots with 6 initially drilled. The plant has a capacity of 80,000 barrels of oil per day, Production start up was in December 1975.[1] Initially production was to an ELSBM and then to the Fulmar Alpha platform in August 1986.The Exposed Location Single Buoy Mooring (ELSBM) has a height of 74 metres and stands in a water depth of 86 metres. It comprises a helideck, a mooring trunk, a mooring rope reel turntable buoyancy compartments and a ballast compartment. It is anchored to the seabed by eight 13.5 tonne anchors and 600 metre chains. It is supplied with oil through two 10 inch diameter hoses.[1]

Associated gas from the reservoir was separated and used to power electrical generation with the excess being flared.

Oil production (in thousands of barrels) was as follows:[1]

See also

[edit]

References

[edit]
  1. ^ a b c d Oilfield Publications Limited (1985). The North Sea Platform Guide. Ledbury: Oilfield Publications Limited. pp. 25–30.
  2. ^ "About Auk". Repsol Sinopec Resources UK. Retrieved 8 September 2020.
  3. ^ "Oil and gas field names in the North Sea" (PDF).