User:Tommyprinton/sandbox
Lithium-Ion Battery
[edit]Applications with nanodot technology have been test in Lithium-Ion batteries. It has been shown that binder-free three-dimensional (3D) macro-mesoporous electrode architecture yields a high performance supercapacitor-like lithium battery. It is about ten times more efficient compared to the current model of a state-of-the-art graphite anode. This electrode architecture simultaneously allows for rapid ion transfer and ultra-short solid-phase ion diffusion resulting in an efficient new binder-free electrode technique towards the development of high-performance supercapacitor-like Li-ion batteries[1].
Lithium-Sulfur Battery
[edit]Incorporation of nanodot technology into Lithium-Sulfur batteries is crucial because rechargeable lithium-sulfur batteries are a significant energy-storage device owing to their eco-friendliness and high theoretical energy density. However, the shuttle effect of soluble polysulfides as well as the slow redox kinetics constrains the development of Li-S batteries. Studies have shown that the coexistence of micropores, mesopores, and macropore in the hierarchical porous carbon are beneficial for physical accommodating/immobilizing active materials sulfur and rapid charge/ion transfer, superior to the most reported biochar-based electrodes, creating an avenue to the design of multifunctional sulfur host for advanced Li-S batteries in the future[2]. The shuttle effect in lithium-sulfur (Li–S) batteries mainly originates from the diffusion of soluble polysulfides (LiPSs) and their depressed redox kinetics and is responsible for the progressive leakage of active material within the battery itself. Researchers have developed a layer composed of acorn shell porous carbon/Sn4P3 nanodots electrocatalyst which serve as a conductive interface but also provides a dual-adsorption barrier to retain active material and inhibit the LiPSs migrating[3].
Sodium-Ion Battery
[edit]Sodium-Ion batteries are very similar to Lithium-Ion batteries in that they are both cations. In these cells however, poor cycle stability due to stacking is one of its main challenges but studies have proved that sulfur nanodots are employed as an efficient antiblocking agent of MoS2 sheet. This arrangement of these sulfur sheets exhibit a higher current density with excellent cycling stability, surviving 300 full charge/discharge cycles with a retention of 83.8%[4]. Sodium-ion batteries also offer an attractive option for potential low cost, large scale energy storage because of the earth's abundance of natural sodium. Red phosphorus is considered as a high capacity anode for sodium-ion batteries. Like silicon in lithium-ion batteries, several limitations, such as large volume expansion upon sodiation/desodiation and low electronic conductance, have severely limited the performance of red phosphorus anodes. Scientists have deposited nanodots densely and uniformly onto reduced graphene oxide sheets to minimize the sodium ion diffusion length and the sodiation/desodiation stresses, and creates free space to accommodate the volume variation of phosphorus particles. This resulted in significant performance improvement for red phosphorus anodes for sodium-ion chemistry and flexible power sources for wearable electronics and smart phone technology[5].
Potassium-Ion Battery
[edit]Researchers have shown that Antimony-based materials with high theoretical capacity have been considered as a promising anode materials for potassium-ion batteries (PIBs). Unfortunately, the large volume expansion leads to rapid capacity fading and poor rate capability. Notably the ultrafine nanodots can remarkedly shorten the ions diffusion distance with enhanced kinetic process in the battery cell. When applied as the anode for potassium-ion batteries, they all show satisfactory potassium-storage properties in terms of high reversible capacity and superior rate capability, especially the excellent electrochemical performances[6].
Cite error: The <ref> tag name cannot be a simple integer (see the help page).
[7]
Cite error: The <ref> tag name cannot be a simple integer (see the help page).
[8]
Cite error: The <ref> tag name cannot be a simple integer (see the help page).
[9]
Cite error: The <ref> tag name cannot be a simple integer (see the help page).
[10]
Cite error: The <ref> tag name cannot be a simple integer (see the help page).
[11]
Cite error: The <ref> tag name cannot be a simple integer (see the help page).
[12]
- ^ 1
- ^ 2
- ^ 3
- ^ 4
- ^ 5
- ^ 6
- ^ Zheng, Xianfeng. "3D interconnected macro-mesoporous electrode with self-assembled NiO nanodots for high-performance supercapacitor-like Li-ion battery". ScienceDirect. Elsevier Ltd. Retrieved 10 April 2021.
- ^ Zhong, Mei-e. "Carbon nanodot-decorated alveolate N, O, S tridoped hierarchical porous carbon as efficient electrocatalysis of polysulfide conversion for lithium-sulfur batteries". ScienceDirect. Elsevier Ltd. Retrieved 10 April 2021.
- ^ Ye, Zhengqing. "Curbing polysulfide shuttling by synergistic engineering layer composed of supported Sn4P3 nanodots electrocatalyst in lithium-sulfur batteries". ScienceDirect. Elsevier Ltd. Retrieved 10 April 2021.
- ^ Xu, Zhanwei (2018). "Sulfur nanodots as MoS2 antiblocking agent for stable sodium ion battery anodes". Journal of Materials Chemistry A (22).
- ^ Lui, Yihang (2017). "Red Phosphorus Nanodots on Reduced Graphene Oxide as a Flexible and Ultra-Fast Anode for Sodium-Ion Batteries". The Journal of Physical Chemistry.
- ^ Yang, Ling. "Heteroatom-doped carbon inlaid with Sb2X3 (X = S, Se) nanodots for high-performance potassium-ion batteries". ScienceDirect. Elsevier Ltd. Retrieved 10 April 2021.