Talk:Freescale DragonBall

Computing High‑importance

	This article is within the scope of WikiProject Computing, a collaborative effort to improve the coverage of computers, computing, and information technology on Wikipedia. If you would like to participate, please visit the project page, where you can join the discussion and see a list of open tasks.ComputingWikipedia:WikiProject ComputingTemplate:WikiProject ComputingComputing articles
High	This article has been rated as High-importance on the project's importance scale.
	This article is supported by Computer hardware task force.

Hong Kong Stub‑class Low‑importance

This article is within the scope of WikiProject Hong Kong, a project to coordinate efforts in improving all Hong Kong-related articles. If you would like to help improve this and other Hong Kong-related articles, you are invited to join this project.Hong KongWikipedia:WikiProject Hong KongTemplate:WikiProject Hong KongHong Kong articles

Stub

This article has been given a rating which conflicts with the project-independent quality rating in the banner shell. Please resolve this conflict if possible.

Low

This article has been rated as Low-importance on the project's importance scale.

Hong Kong To-do:

Attention needed (60)

...needing expert attention (4) • ...without infoboxes (22)

Collaboration needed

Recommend topic

Improvement needed

GA-Class articles (60) • B-Class articles (289)

Cleanup needed

C-Class articles (1,038)

Image needed (348)

Destub needed

Start-Class articles (5,446) • Stub-Class articles (6,731)

Deorphan needed

...orphans

Page creation needed

Requested articles

Miscellaneous tasks

...maintain popularity • ...assess the un-Class (389) • ...assess the un-Importance (1,340)

Untitled

The picture shows the name on the processor itself with a capital B: DragonBall. Shouldn’t the article do the same? —Frungi 22:48, 28 September 2005 (UTC)[reply]

Indeed it would. Freescale declares the processor as DragonBall, so I did the rename. --Arny 09:13, 23 October 2005 (UTC)[reply]

Someone put this note on the main page:
[Quick reader note: The Motorola 68k was 16-bit so the Dragonball -- which is fully 68k-compatible -- should also be 16-bit. I wish I could find clarification of this. The ARM CPU range is however 32-bit.]
You were right, I've corrected that and included the actual specifications from Freescale. --Arny 09:13, 23 October 2005 (UTC)[reply]

The DragonBall is 32-bit:

It's listed as 32-bit on Freescale's website.
The Motorola 68k is not 16-bit. The first implementation of the 68k architecture (the 68000) was implemented with a 16-bit databus and a 16-bit ALU (IIRC), but this was hidden from the programmer, and the architecture has always been 32-bit, including 32-bit registers and instructions that operates on 32-bit datatypes. Later implementations of the 68k-core was implemented with a 32-bit ALU, and a complete 32-bit data and addressbus.

If 68000 is 32-bit, then Z80 and 6809 are both 16-bit conserning the same reasoning you posted.

VZ speed?

Was it really 37 Mhz? The one in my Palm m515 runs default at 33 Mhz.

I think you're right: Freescale website says 33 MHz, 5.4 MIPS. Letdorf 10:37, 9 November 2006 (UTC).[reply]

Name Origin

Did the name DragonBall Have anything to do with the DragonBall manga series. I noticed that three of the models have 'Z' in the name.

I know! copyright infringement! —Preceding unsigned comment added by 75.57.191.180 (talk) 02:30, 16 December 2008 (UTC)[reply]

External Address Bus

It is a 16-bit processor with 32-bit internal and external address bus (24-bit external address bus for EZ and VZ variants).

Found supporting documentation for EZ at http://www.freescale.com/files/32bit/doc/prod_brief/MC68EZ328.pdf?fsrch=1. Can anyone verify VZ? - MSTCrow 22:37, 12 January 2007 (UTC)[reply]

Clock speed of the EZ and AlphaSmart

There was also a 20MHz variant of the EZ variant, as used in the Palm IIIc and the Vx. Using the Dana/Dana Wireless as an example for AlphaSmarts using the DragonBall isn't the best idea because it is essentially a Palm handheld with a keyboard stuck on. The 3000, and most likely the 2000 use the DragonBall EZ CPU, and the Neo uses the VZ chip. Anyway, great article though! Kasm279 (talk) 20:04, 18 December 2010 (UTC)[reply]

MX-1 image

It is confusing to place the image of the MX-1 on the subject page, while it apparently belongs to the i.MX series which is not described on the subject page. Tomdo08 (talk) 23:58, 21 January 2018 (UTC)[reply]

I moved the image over to i.MX. Regarding correct identification: Check the codename MC9328MX1 in image and e.g http://phonedb.net/index.php?m=processor&id=52&c=freescale_i.mx1__mc9328mx1 Tomdo08 (talk) 00:24, 22 January 2018 (UTC)[reply]