Jump to content

Splash lubrication

From Wikipedia, the free encyclopedia
An early Sabb engine that would have used splash lubrication.
The centre con-rod has a spade for splash lubrication.

Splash lubrication is a rudimentary form of lubrication found in early engines.[1] Such engines could be external combustion engines (such as stationary steam engines), or internal combustion engines (such as petrol, diesel or paraffin engines).[2]

Description

[edit]

An engine that uses splash lubrication requires neither oil pump nor oil filter. Splash lubrication is an antique system whereby scoops on the big-ends of the connecting rods dip into the oil sump and splash the lubricant upwards towards the cylinders, creating an oil mist which settles into droplets. The oil droplets then pass through drillings to the bearings and thereby lubricate the moving parts.[3] Provided that the bearing is a ball bearing or a roller bearing, splash lubrication would usually be sufficient; however, plain bearings typically need a pressure feed to maintain the oil film, loss of which leads to overheating and seizure.

The splash lubrication system has simplicity, reliability, and cheapness within its virtues.[4] However, splash lubrication can work only on very low-revving engines, as otherwise the sump oil would become a frothy mousse. The Norwegian firm, Sabb Motor, produced a number of small marine diesel engines, mostly single-cylinder or twin-cylinder units, that used splash lubrication.

Modern use of splash lubrication

[edit]

Splash lubrication is still used in modern engines and mechanisms,[5][6] such as:

See also

[edit]

References

[edit]
  1. ^ "What is Splash Lubrication - Learn How Engine Lubrication Happens". blockerandwallace.com. Retrieved 2024-02-13.
  2. ^ Kumar, Er. Amrit (2020-06-25). "Different Types of Lubrication System in Detail [Notes & PDF]". themechanicalengineering.com. Retrieved 2024-02-13.
  3. ^ Bloom, Leah (2024-01-08). "What is Splash Lubrication? (with pictures)". About Mechanics. Retrieved 2024-02-13.
  4. ^ "Pros & cons of splash lubrication".[dead link]
  5. ^ Johanson, Eric (2017-03-02). "Splash and Pressure Lubrication Systems in Piston Compressors". The Compressed Air Blog. Retrieved 2024-02-13.
  6. ^ Adenwala, Noaman (2018-09-13). "Lubrication System: Petroil, Splash, Pressure, Semi-Pressure, Sump [PDF]". dizz.com. Retrieved 2024-02-13.
[edit]