Safety net
This article needs additional citations for verification. (February 2017) |
A safety net is a type of net designed to protect people from injury after falling from heights by limiting the distance they fall, and dissipating the impact energy. The term also refers to devices for arresting falling or flying objects for the safety of people beyond or below the net.
Safety nets are used in construction, building maintenance, entertainment, and other industries.
Action of a safety net
[edit]A safety net gives falling objects much more time to come to rest than hitting the hard ground directly. In physical terms, this means more time for deceleration and kinetic energy transfer, resulting in a softer landing and a much lower risk of damage.
The specific type of net to be used depends upon many factors, such as the falling object's speed and mass. To withstand more force, a greater total width of the net is required. The minimum distance between the spot on the net where the object impacted and the nearest edge of the net is also important and must be maintained above a certain limit. The materials used to make the net, and the tension of the net's ropes, are other important factors. Additionally, the net must be placed at an appropriate height from the hard ground, so that a falling object could not make contact with the ground. The hole size of the net should not be so big that falling objects could pass through its holes.[1]
Construction safety net
[edit]Construction safety nets are used on high-rise building construction sites to prevent the fall of people or objects from the site. Construction safety nets are the safest and most cost-effective fall prevention system in such an environment. Construction safety nets are typically made from high-density polyethylene (or HDPE) fibers. The construction safety netting system, also known as debris netting, can be installed both horizontally and vertically according to the site requirements. The best practice of construction safety netting is to wrap up the whole construction site from bottom to top, which works as a protection wall to prevent anything from falling without blocking the view of workers on the site. Installation of a safety net at any building site requires professional expertise and technical knowledge.[citation needed]
Other uses of safety nets
[edit]Safety nets can also be used for escape from a building during a disaster (especially fires), action-sports and entertainment, etc.
See also
[edit]- Construction site safety
- Fall arrest harness
- Roof edge protection
- Shock absorber
- Buffer (disambiguation)
- Buffer stop
- Buffer (rail transport)
- Damping ratio
- Damper (disambiguation)
- Damped wave
- Cushioning
- Shock (mechanics)
- Impact (mechanics)
- Jerk (physics)
- Impulse (physics)
- Collision
- Brake
- Terminal velocity
References
[edit]External links
[edit]- Safety Net Systems // Occupational Safety & Health Administration
- Safety nets: Fall protection for the construction industry / National Safety Council Data Sheet 608, February 2006
- Fall Protection in Construction, OSHA3146 / U.S. Department of Labor Occupational Safety and Health Administration, 1998, page 6 "Fall Protection Systems Criteria and Practices", page 12 "Safety Net Systems"
- Guide to Fall Protection Regulations, Workers Compensation Board, Canada, June 2013, page 11
- A technical guide to the selection and use of fall prevention and arrest equipment / Glasgow Caledonian University for the Health and Safety Executive 2005 - "7.0 FALL ARREST NETTING (SAFETY NETS)" pp 107–138