LNWR Teutonic Class

LNWR Teutonic class
No. 1301 Teutonic Crewe Works portrait
Type and origin Power type Steam Designer F. W. Webb Builder Crewe Works Serial number 3102–3111 Build date March 1889 – June 1890 Total produced 10
Specifications Configuration: ​  • Whyte 2-2-2-0  • UIC 1AA n3v Gauge 4 ft 8+1⁄2 in (1,435 mm) Leading dia. 3 ft 10+1⁄2 in (1.181 m) + tyres Driver dia. 6 ft 10 in (2.083 m) + tyres Wheelbase: ​  • Engine 18 ft 1 in (5.51 m)  • Leading 8 ft 5 in (2.57 m)  • Drivers 9 ft 8 in (2.95 m) Loco weight 46 long tons (47 t) Boiler: ​  • Diameter 4 ft 2 in (1.27 m)  • Tube plates 11 ft 0 in (3.35 m) Boiler pressure 175 lbf/in2 (1.21 MPa) Heating surface 1,401.5 sq ft (130.20 m2) Cylinders Three: two HP (outside), one LP (inside) High-pressure cylinder 14 in × 24 in (356 mm × 610 mm) Low-pressure cylinder 30 in × 24 in (762 mm × 610 mm) Valve gear Outside: Joy Inside: Slip-eccentric
Career Operators London and North Western Railway Scrapped October 1905 – July 1907 Disposition All scrapped

The LNWR Teutonic class was a class of 10 passenger three-cylinder compound 2-2-2-0 locomotives designed by F. W. Webb for the London and North Western Railway, and manufactured by them in their Crewe Works between 1889 and 1890.

Design

No. 1301 Teutonic in black livery

The design featured a boiler pressed to 175 lbf/in² (1.21 MPa) delivering saturated steam to two outside 14-inch (356 mm) high-pressure cylinders, which exhausted to one 30-inch (762 mm) low-pressure cylinder inside the frames. All three cylinders had a stroke of 24 inches (610 mm); the high-pressure cylinders drove the rear wheels, while the low-pressure drove the leading driving wheels. As the two pairs of driving wheels were not connected, the locomotives were "duplex drive" or "double-singles".

They were a development of Webb's Dreadnought class; they had larger driving and leading wheels, and the additions of cylinder tail rods (which were later removed). There were also further modifications to the Joy valve gear, but the seven locomotives built in 1890 had the inside cylinder worked by slip-eccentric valve gear instead from new.

Of the ten locomotives, nine were named after ships of the White Star Line, the exception was named after a character in a Walter Scott novel, as it was exhibited at the Edinburgh International Exhibition of 1890.

Decline

When George Whale become chief mechanical engineer of the LNWR in 1903, he started a programme of eliminating Webb's over-complicated duplex compound locomotives. Consequently, the class was scrapped between October 1905, and July 1907, having been replaced by Whale's Experiment class.

Table of locomotives

LNWR No.	LNWR Name	Crewe Works No.	Date built	Date scrapped	Notes
1301	Teutonic	3102	Mar 1889	Oct 1905
1302	Oceanic	3103	May 1889	Jan 1907
1303	Pacific	3104	Jun 1889	Jan 1907
1304	Jeanie Deans	3105	Mar 1890	Sep 1906
1305	Doric	3106	May 1890	Jun 1906
1306	Ionic	3107	Jun 1890	Dec 1905
1307	Coptic	3108	Jun 1890	Dec 1905
1309	Adriatic	3109	Jun 1890	Jul 1907
1311	Celtic	3110	Jun 1890	Jun 1906
1312	Gallic	3111	Jun 1890	Jun 1906

References

• Baxter, Bertram (1979). Baxter, David (ed.). British Locomotive Catalogue 1825–1923, Volume 2B: London and North Western Railway and its constituent companies. Ashbourne, Derbyshire: Moorland Publishing Company. ISBN 0-903485-84-2.