Jump to content

Corozal (dredger)

From Wikipedia, the free encyclopedia
US Corozal at work on the Panama Canal
History
NameUS Corozal
OwnerUS Government
Port of registryUnited States (no. ON226006)
Ordered1911
BuilderMessrs. Wm. Simons & Company London Works, Renfrew
Laid down1911
Launched12 November 1911
FateSold 1926
History
NameCorozal
OwnerArundel Corporation
Acquired1926
FateBroken up November 1956
General characteristics
TypeBucket-ladder dredger
Tonnage1,684 GRT
Length261.1 feet (79.6 m)
Beam45.2 feet (13.8 m)
Propulsion2xtriple-expansion, surface-condensing engines
Speed11 knots
Capacity1,200 long tons (1,200 t) of dredgings

The Corozal was a Scottish-built dredger used on the Panama Canal. The Renfrew-based firm of Messrs. Wm. Simons & Company won a US government tender for its construction in 1911. The vessel was launched in November 1911 and taken into US government service as the US Corozal. It was the most powerful dredger ever built at that time. The Corozal operated on the difficult Culebra Cut, deepening a channel excavated by hand and dynamite. It became the first ship to sail through the cut in December 1913, shortly before the canal opened to traffic. The Corozal was sold to the Arundel Corporation in 1926 and scrapped in 1956.

Construction

[edit]
1913 drawing of its internal construction and method of operation

The United States government took over the construction of the Panama Canal from a French company in 1904. As part of the project, in 1911 bids were invited for the construction of a dredger, which would become the US Corozal. The Scottish firms Messrs. Wm. Simons & Company won the tender with a bid less than half that of their San Francisco-based competitor.[1] The Corozal was built at Simons' London Works in Renfrew in the west Central Lowlands.[2]

The Corozal was a bucket ladder dredger with a capacity of 1,200 long tons (1,200 t) of dredgings and of 1,684 gross register tonnage.[2][3] She measured 261.1 feet (79.6 m) in length and 45.2 feet (13.8 m) in width.[2] She was propelled by 2 sets of triple-expansion, surface-condensing engines supplied by two cylindrical boilers and was capable of making 11 knots. The Corozal also had two auxiliary 2-cylinder engines which operated manoeuvring winches at the bow and stern.[3]

Corozal's bucket ladder could reach depths of up to 50 feet (15 m) and could be raised or lowered at a rate of 10 feet (3.0 m) per minute. It could use two different sets of buckets: ones of 54 cubic feet (1.5 m3) capacity for soft material and ones of 35 cubic feet (1 m3) for stiff clay. The bucket chain could move at three different speeds to suit different strengths of material.[3] Each bucket could carry several tonnes of weight and there were 50 buckets on each chain.[1] The entire chain arrangement weighed 240 long tons (240 t). The dredgings could be loaded into an internal hopper or sent by chute into a barge alongside.[3] At the time of her construction she was the most powerful dredger ever built.[1]

The Corozal was launched on 12 November 1911. She was registered in the United States under the number ON226006.[2] The vessel was tested by dredging sand and mud off Gareloch and stiffer material in the Musgrave Channel, Belfast, before being sailed to Panama.[3]

Panama Canal

[edit]
1913 postcard showing the Corozal, men inside one of its buckets and the engineer W. G. Comber

In Panama Corozal worked on the Culebra Cut, one of the most difficult parts of the canal to excavate owing to frequent mudslides. Once the cut had been excavated manually by workers and with dynamite it was flooded and deepened by dredging. The Corozal was one of around 34 dredging vessels used during the canal's construction.[1] Although the cut was completed by May 1913 it had been blocked by a mudslide at Cucaracha and the Corozal was one of the dredgers used to clear this final obstacle.[4] In December 1913 she became the first ship to sail through the Culebra Cut, which was the last part of the canal to be dug. The canal opened in 1914.[1] During its time on the canal the Corozal excavated 4,000,000 cubic yards (3,100,000 m3) of material.[4]

Later service

[edit]

The US government sold the Corozal to the Arundel Corporation of Philadelphia and Baltimore in 1926. She was broken up at Jacksonville in November 1956.[2]

A model of the vessel, dating from the time of its construction, is in the collection of the Paisley Museum. It will feature prominently in an exhibition when the museum opens in new premises in 2023.[1]

References

[edit]
  1. ^ a b c d e f "The Corozal: Scottish dredger that helped build the Panama Canal". BBC News. 31 December 2021. Retrieved 31 December 2021.
  2. ^ a b c d e "Screw Steamer U S COROZAL built by William Simons & Co. Ltd. in 1911 for U. S. Government - Panama Canal Company, Dredger". Clyde Ships. Retrieved 31 December 2021.
  3. ^ a b c d e "The British-built Dredger for Panama". Scientific American. No. 105. 4 November 1911. Retrieved 31 December 2021.
  4. ^ a b "Somebody Dying Every Day". Panama Exhibit. Linda Hall Library. Retrieved 31 December 2021.