Jump to content

Caesium

Edit links
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Materialscientist (talk | contribs) at 06:33, 29 November 2010 (Reverted edits by 204.174.89.112 (talk) to last version by Chadley99). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Caesium, 55Cs
Some pale gold metal, with a liquid-like texture and lustre, sealed in a glass ampoule
Caesium
Pronunciation/ˈsiːziəm/ ​(SEE-zee-əm)
Alternative namecesium (US)
Appearancepale gold
Standard atomic weight Ar°(Cs)
Caesium in the periodic table
Hydrogen Helium
Lithium Beryllium Boron Carbon Nitrogen Oxygen Fluorine Neon
Sodium Magnesium Aluminium Silicon Phosphorus Sulfur Chlorine Argon
Potassium Calcium Scandium Titanium Vanadium Chromium Manganese Iron Cobalt Nickel Copper Zinc Gallium Germanium Arsenic Selenium Bromine Krypton
Rubidium Strontium Yttrium Zirconium Niobium Molybdenum Technetium Ruthenium Rhodium Palladium Silver Cadmium Indium Tin Antimony Tellurium Iodine Xenon
Caesium Barium Lanthanum Cerium Praseodymium Neodymium Promethium Samarium Europium Gadolinium Terbium Dysprosium Holmium Erbium Thulium Ytterbium Lutetium Hafnium Tantalum Tungsten Rhenium Osmium Iridium Platinum Gold Mercury (element) Thallium Lead Bismuth Polonium Astatine Radon
Francium Radium Actinium Thorium Protactinium Uranium Neptunium Plutonium Americium Curium Berkelium Californium Einsteinium Fermium Mendelevium Nobelium Lawrencium Rutherfordium Dubnium Seaborgium Bohrium Hassium Meitnerium Darmstadtium Roentgenium Copernicium Nihonium Flerovium Moscovium Livermorium Tennessine Oganesson
Rb
↑
Cs
↓
Fr
xenon ← caesium → barium
Atomic number (Z)55
Groupgroup 1: hydrogen and alkali metals
Periodperiod 6
Block  s-block
Electron configuration[Xe] 6s1
Electrons per shell2, 8, 18, 18, 8, 1
Physical properties
Phase at STPsolid
Melting point301.7 K ​(28.5 °C, ​83.3 °F)
Boiling point944 K ​(671 °C, ​1240 °F)
Density (at 20° C)1.886 g/cm3 [3]
when liquid (at m.p.)1.843 g/cm3
Critical point1938 K, 9.4 MPa[4]
Heat of fusion2.09 kJ/mol
Heat of vaporization63.9 kJ/mol
Molar heat capacity32.210 J/(mol·K)
Vapor pressure
P (Pa) 1 10 100 1 k 10 k 100 k
at T (K) 418 469 534 623 750 940
Atomic properties
Oxidation statescommon: +1
−1[5]
ElectronegativityPauling scale: 0.79
Ionization energies
  • 1st: 375.7 kJ/mol
  • 2nd: 2234.3 kJ/mol
  • 3rd: 3400 kJ/mol
Atomic radiusempirical: 265 pm
Covalent radius244±11 pm
Van der Waals radius343 pm
Color lines in a spectral range
Spectral lines of caesium
Other properties
Natural occurrenceprimordial
Crystal structure ​body-centered cubic (bcc) (cI2)
Lattice constant
Bodycentredcubic crystal structure for caesium
a = 616.2 pm (at 20 °C)[3]
Thermal expansion92.6×10−6/K (at 20 °C)[3]
Thermal conductivity35.9 W/(m⋅K)
Electrical resistivity205 nΩ⋅m (at 20 °C)
Magnetic orderingparamagnetic[6]
Young's modulus1.7 GPa
Bulk modulus1.6 GPa
Mohs hardness0.2
Brinell hardness0.14 MPa
CAS Number7440-46-2
History
Namingfrom Latin caesius 'bluish grey', for its spectral colours
DiscoveryRobert Bunsen and Gustav Kirchhoff (1860)
First isolationCarl Setterberg (1882)
Isotopes of caesium
Main isotopes[7] Decay
abun­dance half-life (t1/2) mode pro­duct
131Cs synth 9.7 d ε 131Xe
133Cs 100% stable
134Cs synth 2.0648 y ε 134Xe
β− 134Ba
135Cs trace 1.33×106 y β− 135Ba
137Cs synth 30.17 y[8] β− 137Ba
 Category: Caesium
| references

Caesium or cesium[note 1] (/[invalid input: 'icon']ˈsiːziəm/ SEE-zee-əm) is the chemical element with the symbol Cs and atomic number 55. It is a soft, silvery-gold alkali metal with a melting point of 28 °C (83 °F), which makes it one of only five metals that are liquid at or near room temperature.[note 2] Caesium has physical and chemical properties similar to those of rubidium and potassium. The metal is extremely reactive and pyrophoric, reacting with water even at −116 °C (−177 °F). It is the least electronegative element that has stable isotopes, of which it has only one, caesium-133. Caesium is mined mostly from pollucite, while the radioisotopes, especially caesium-137, are extracted from waste produced by nuclear reactors.

Two German chemists, Robert Bunsen and Gustav Kirchhoff, discovered caesium in 1860 by the newly developed method of flame spectroscopy. The first small-scale applications for caesium have been as a "getter" in vacuum tubes and in photoelectric cells. In 1967, a specific frequency from the emission spectrum of caesium-133 was chosen to be used in the definition of the second by the International System of Units. Since then, caesium has been widely used in atomic clocks.

Since the 1990s, the largest application of the element has been as caesium formate for drilling fluids. It has a range of applications in the production of electricity, in electronics, and in chemistry. The radioactive isotope caesium-137 has a half-life of about 30 years and is used in medical applications, industrial gauges, and hydrology. Although the element is only mildly toxic, it is a hazardous material as a metal and its radioisotopes present a high health risk in case of radiation leaks.

Characteristics

Physical properties

Y shaped yellowish crystal in glass ampoule, looking like the branch of a pine tree
High-purity caesium-133 preserved under argon

Caesium is a very soft (it has the lowest Mohs hardness of all elements), very ductile, silvery-white metal, which develops a silvery-gold hue in the presence of trace amounts of oxygen.[13][14] It has a melting point of 28.4 °C (83.1 °F), making it one of the few metals that are liquid near room temperature. Mercury is the only metal with a known melting point lower than caesium.[note 3][16] In addition, the metal has a rather low boiling point, 641 °C (1,186 °F), the second lowest of all metals.[17] Its compounds burn with a blue color.[18]

Caesium forms alloys with the other alkali metals as well as with gold, and amalgams with mercury. At temperatures below 650 °C (1,202 °F), it alloys with cobalt, iron, molybdenum, nickel, platinum, tantalum or tungsten. It forms well defined intermetallic compounds with antimony, gallium, indium and thorium, which are photosensitive.[13] It mixes with the other alkali metals (except with lithium), and the alloy with a molar distribution of 41% caesium, 47% potassium, and 12% sodium has the lowest melting point of any known metal alloy, at −78 °C (−108 °F).[16][19] A few amalgams have been studied: CsHg
2 is black with a purple metallic lustre, while CsHg is golden-coloured, also with a metallic lustre.[20]

Chemical properties

Addition of a small amount of caesium to cold water is explosive.

Caesium metal is highly reactive and is very pyrophoric. In addition to igniting spontaneously in air, it reacts explosively with water even at low temperatures, more so than other members of the first group of the periodic table.[13] The reaction with solid water occurs at temperatures as low as −116 °C (−177 °F).[16] Because of its high reactivity, the metal is classified as a hazardous material. It is stored and shipped in dry saturated hydrocarbons such as mineral oil. Similarly, it must be handled under inert atmosphere such as argon or nitrogen. It can be stored in vacuum-sealed borosilicate glass ampoules. In quantities of more than about 100 grams (3.5 oz), caesium is shipped in hermetically sealed stainless steel containers.[13]

The chemistry of caesium is not very similar to that of other alkali metals, but is more closely similar to that of rubidium, the element above caesium in the periodic table.[21] Some small differences arise from the fact that it has a higher atomic mass and is more electropositive than other (non-radioactive) alkali metals.[22] Caesium is the most electropositive stable chemical element.[note 4][16]

Compounds

27 small grey spheres in 3 evenly spaced layers of nine. 8 spheres form a regular cube and 8 of those cubes form a larger cube. The grey spheres represent the caesium atoms. The center of each small cube is occupied by a small green sphere representing a chlorine atom. Thus, every chlorine is in the middle of a cube formed by caesium atoms and every caesium is in the middle of a cube formed by chlorine.
Ball-and-stick model of the cubic coordination of Cs and Cl in CsCl

The vast majority of caesium compounds contain the element as the cation Cs+
, which binds ionically to a wide variety of anions. One noteworthy exception is provided by the caeside anion (Cs−
).[24] Other exceptions include the several suboxides (see section on oxides below).

Returning to more normal compounds, salts of Cs+ are almost invariably colorless unless the anion itself is colored. Many of the simple salts are hygroscopic, but less so than the corresponding salts of the lighter alkali metals. The acetate, carbonate, halides, oxide, nitrate, and sulfate salts are water-soluble. Double salts are often less soluble, and the low solubility of cesium aluminum sulfate is exploited in the purification of Cs+ from its ores. The double salt with antimony (such as CsSbCl
4), bismuth, cadmium, copper, iron, and lead are also poorly soluble.[13]

Caesium hydroxide (CsOH) is hygroscopic and a very strong base.[21] It rapidly etches the surface of semiconductors such as silicon.[25] CsOH has been previously regarded by chemists as the "strongest base", reflecting the relatively weak attraction between the large Cs+ ion and OH-.[18] Many compounds are far more basic than CsOH, such as n-butyllithium and sodium amide.[21]

Complexes

Like all metal cations, Cs+ forms complexes with Lewis bases in solution. Because of its large size, Cs+ usually adopts coordination numbers greater than six-coordination, which is typical for the lighter alkali metal cations. This trend is already apparent by the 8-coordination in CsCl, vs the halite motif adopted by the other alkali metal chlorides. Its high coordination number and softness (tendency to form covalent bonds) are the basis of the separation of Cs+ from other cations, as is practiced in the remediation of nuclear wastes, where 137Cs+ is separated from large amounts of non-radioactive K+.[26]

Halides

Caesium chloride (CsCl) crystallizes in the simple cubic crystal system. Also called the "caesium chloride structure",[22] this structural motif is composed of a primitive cubic lattice with a two-atom basis, each with an eightfold coordination; the chloride atoms lie upon the lattice points at the edges of the cube, while the caesium atoms lie in the holes in the center of the cubes. This structure is shared with CsBr and CsI, and many other compounds that do not contain Cs. In contrast, most other alkaline halides adopt the sodium chloride (NaCl) structure.[22] The CsCl structure is preferred because Cs+ has an ionic radius of 174 pm and Cl−
 181 pm).[27]

Oxides

The stick and ball diagram shows three regular octahedra which are connected to the next one by one surface and the last one shares one surface with the first. All three have one edge in common. All eleven vertices are purple spheres representing caesium, and at the center of each octahedron is a small red sphere representing oxygen.
Cs
11O
3 cluster

Moreso than the other alkali metals, caesium forms numerous binary compounds with oxygen. When caesium burns in air, the superoxide CsO
2 is the main product.[28] The "normal" caesium oxide (Cs
2O) forms yellow-orange hexagonal crystals,[29] and is the only oxide of the anti-CdCl
2 type.[30] It vaporizes at 250 °C (482 °F), and decomposes to caesium metal and the peroxide Cs
2O
2 at temperatures above 400 °C (752 °F).[31] Aside from the superoxide and the ozonide CsO
3,[32][33] several brightly colored suboxides have also been studied.[34] These include Cs
7O, Cs
4O, Cs
11O
3, Cs
3O (dark-green[35]), CsO, Cs
3O
2,[36] as well as Cs
7O
2.[37][38] The latter may be heated under vacuum to generate Cs
2O.[30] Binary compounds with sulfur, selenium, and tellurium also exist.[13]

Isotopes

Main article: Isotopes of caesium

Caesium has a total of 39 known isotopes that range in their mass number (i.e. number of nucleons in its nucleus) from 112 to 151. Several of these are synthesized from lighter elements by the slow neutron capture process (S-process) inside old stars,[39] as well as inside supernova explosions (R-process).[40] However, the only stable isotope is 133Cs, which has 78 neutrons. Although it has a large nuclear spin (7/2+), nuclear magnetic resonance studies can be done with this isotope at a resonating frequency of 11.7 MHz.[41]

A graph showing the energetics of caesium-137 (nuclear spin: I=7/2+, half-life of about 30 years) decay. With a 94.6% probability, it decays by a 512 keV beta emission into barium-137m (I=11/2-, t=2.55min); this further decays by a 662 keV gamma emission with an 85.1% probability into barium-137 (I=3/2+). Alternatively, caesium-137 may decay directly into barium-137 by a 0.4% probability beta emission.
Decay of caesium-137

The radioactive 135Cs has a very long half-life of about 2.3 million years, while 137Cs and 134Cs have half-lives of 30 and 2 years, respectively. 137Cs decomposes to a short-lived 137mBa by beta decay, and then to non-radioactive barium, while 134Cs transforms into 134Ba directly. The isotopes with mass numbers of 129, 131, 132 and 136, have half-times between a day and two weeks, while most of the other isotopes have half-lives from a few seconds to fractions of a second. There are at least 21 metastable nuclear isomers. Other than 134mCs (with a half-life of just under 3 hours), all are very unstable and decay with half-lives of a few minutes or less.[42][43]

The isotope 135Cs is one of medium-lived fission products of uranium which form in nuclear reactors.[44] However, its fission product yield is reduced in most reactors because its predecessor, 135Xe, is an extremely potent neutron poison and transmutes frequently to stable 136Xe before it can decay to 135Cs.[45][46]

Because of its beta decay (to 137mBa), 137Cs is a strong emitter of gamma radiation.[47] Its half-life makes it the principal long-lived fission product along with 90Sr—both are responsible for radioactivity of spent nuclear fuel after several years of cooling up to several hundred years after use.[48] For example 137Cs together with 90Sr currently generate the largest source of radioactivity generated in the area around the Chernobyl disaster.[49] It is not feasible to dispose of 137Cs through neutron capture (due to the low capture rate) and as a result it must be allowed to decay.[50]

Almost all caesium produced from nuclear fission comes from beta decay of originally more neutron-rich fission products, passing through various isotopes of iodine and of xenon.[51] Because iodine and xenon are volatile and can diffuse through nuclear fuel or air, radioactive caesium is often created far from the original site of fission.[52] With the commencement of nuclear weapons testing around 1945, 137Cs was released into the atmosphere and then returned to the surface of the earth as a component of radioactive fallout.[13]

Occurrence

A white mineral, from which white and pale pink crystals protrude
Pollucite, a caesium mineral
See also: Caesium minerals

Caesium is a relatively rare element as it is estimated to average approximately 3 parts per million in the Earth’s crust.[53] This makes it the 45th most abundant of all elements and the 36th of all the metals. Nevertheless, it is more abundant than such elements as antimony, cadmium, tin and tungsten, and two orders of magnitude more abundant than mercury or silver, but 30 times less abundant than rubidium—with which it is so closely chemically associated.[13]

Due of its large ionic radius, caesium is one of the "incompatible elements."[54] During magma crystallization, caesium was concentrated in the liquid phase and crystallizes last. Therefore, the largest deposits of caesium are zone pegmatite ore bodies formed by this enrichment process. Because caesium does not substitute for potassium as readily as does rubidium, the alkali evaporite minerals sylvite (KCl) and carnallite (KMgCl
3·6H
2O) may contain only 0.002% caesium. Consequently, Cs is found in only few minerals. Percent amounts of caesium may be found in beryl (Be
3Al
2(SiO
3)
6) and avogadrite ((K,Cs)BF
4), up to 15 wt% Cs2O in the closely related mineral pezzottaite (Cs(Be2Li)Al2Si6O18), up to 8.4 wt% Cs2O in the rare mineral londonite ((Cs,K)Al
4Be
4(B,Be)
12O
28), and less in the more widespread rhodizite.[13] The only economically important source mineral for caesium is pollucite Cs(AlSi
2O
6), which is found in a few places around the world in zoned pegmatites, and is associated with the more commercially important lithium minerals lepidolite and petalite. Within the pegmatites, the large grain size and the strong separation of the minerals create high-grade ore for mining.[55]

One of the world's most significant and rich sources of the metal is the Tanco mine at Bernic Lake in Manitoba, Canada. The deposits there are estimated to contain 350,000 metric tons of pollucite ore, which represents more than two-thirds of the world’s reserve base.[55][56] Although the stoichiometric content of caesium in pollucite is 42.6%, pure pollucite samples from this deposit contain only about 34% caesium, while the average content is 24 wt%.[56] Commercial pollucite contains over 19% caesium.[57] The Bikita pegmatite deposit in Zimbabwe is mined for its petalite but it also contains significant amount of pollucite. Notable amounts of pollucite are also mined in the Karibib Desert, Namibia.[56] At the present rate of world mine production of 5 to 10  metric tons per year, reserves will last thousands of years.[13]

Production

The mining of pollucite ore is a selective process and is conducted on a small scale in comparison with most metal mining operations. The ore is crushed, hand-sorted, but not usually concentrated, and then ground. Caesium is then extracted from pollucite mainly by three methods: acid digestion, alkaline decomposition, and direct reduction.[13][58]

In the acid digestion, the silicate pollucite rock is dissolved with strong acids such as hydrochloric (HCl), sulfuric (H
2SO
4), hydrobromic (HBr), or hydrofluoric (HF). With hydrochloric acid, a mixture of soluble chlorides is produced, and the insoluble chloride double salts of caesium are precipitated as caesium antimony chloride (Cs
4SbCl
7), caesium iodine chloride (Cs
2ICl), or caesium hexachlorocerate (Cs
2(CeCl
6)). After separation, the pure precipitated double salt is decomposed, and pure CsCl is obtained after evaporating the water. The method using sulfuric acid yields the insoluble double salt directly as caesium alum (CsAl(SO
4)
2·12H
2O). The aluminium sulfate in it is converted to the insoluble aluminium oxide by roasting the alum with carbon, and the resulting product is leached with water to yield a Cs
2SO
4 solution.[13]

The roasting of pollucite with calcium carbonate and calcium chloride yields insoluble calcium silicates and soluble caesium chloride. Leaching with water or dilute ammonia (NH
4OH) yields then a dilute chloride (CsCl) solution. This solution can be evaporated to produce caesium chloride or transformed into caesium alum or caesium carbonate. Albeit not commercially feasible, direct reduction of the ore with potassium, sodium or calcium in vacuum can produce caesium metal directly.[13]

Most of the mined caesium (as salts) is directly converted into caesium formate (HCOO−Cs+) for applications such as oil drilling. To supply the developing market, Cabot Corporation built a production plant in 1997 at the Tanco Mine near Bernic Lake in Manitoba, Canada, with a capacity of 12,000 barrels per year of caesium formate solution.[59] The primary smaller-scale commercial compounds of caesium are caesium chloride and its nitrate.[60]

Alternatively, caesium metal may be obtained from the purified compounds derived from the ore. Caesium chloride, and the other caesium halides as well, can be reduced at 700 to 800 °C (1,292 to 1,472 °F) with calcium or barium, followed by distillation of the caesium metal. In the same way, the aluminate, carbonate, or hydroxide may be reduced by magnesium.[13] The metal can also be isolated by electrolysis of fused caesium cyanide (CsCN). Exceptionally pure and gas-free caesium can be made by the thermal decomposition at 390 °C (734 °F) of caesium azide CsN
3, which is produced from aqueous caesium sulfate and barium azide.[58] In vacuum applications, caesium dichromate can be reacted with zirconium forming pure caesium metal without other gaseous products.[60]

Cs
2Cr
2O
7 + 2 Zr → 2 Cs + 2 ZrO
2+ Cr
2O
3

The price of 99.8% pure caesium (metal basis) in 2009 was about US$10 per gram ($280 per ounce), but its compounds are significantly cheaper.[56]

History

Three middle-aged men, with the one in the middle sitting down. All wear long jackets, and the shorter man on the left has a beard.
Gustav Kirchhoff (left) and Robert Bunsen (center) discovered caesium spectroscopically.

In 1860, Robert Bunsen and Gustav Kirchhoff discovered caesium in the mineral water from Dürkheim, Germany. Due to the bright blue lines in its emission spectrum, they chose a name derived from the Latin word caesius, meaning sky-blue.[note 5][61][62][63] Caesium was the first element to be discovered spectroscopically, only one year after the invention of the spectroscope by Bunsen and Kirchhoff.[16]

To obtain a pure sample of caesium, 44,000 liters (9,700 imp gal; 12,000 U.S. gal) of mineral water had to be evaporated to yield 240 kilograms (530 lb) of concentrated salt solution. The alkaline earth metals were precipitated either as sulfates or oxalates, leaving the alkali metal in the solution. After conversion to the nitrates and extraction with ethanol, a sodium-free mixture was obtained. From this mixture, the lithium was precipitated by ammonium carbonate. Potassium, rubidium and caesium form insoluble salts with chloroplatinic acid, but these salts show a slight difference in solubility in hot water. Therefore, the less-soluble caesium and rubidium hexachloroplatinate ((Cs,Rb)2PtCl6) could be obtained by fractional crystallization. After reduction of the hexachloroplatinate with hydrogen, caesium and rubidium could be separated by the difference in solubility of their carbonates in alcohol. The process yielded 9.2 grams (0.32 oz) of rubidium chloride and 7.3 grams (0.26 oz) of caesium chloride from the initial 44,000 liters of mineral water.[62]

The two scientists used the caesium chloride thus obtained to estimate the atomic weight of the new element at 123.35 (compared to the currently accepted one of 132.9).[62] They tried to generate elemental caesium by electrolysis of molten caesium chloride, but instead of a metal, they obtained a blue homogenous substance which "neither under the naked eye nor under the microscope" showed the slightest trace of metallic substance;" as a result, they assigned it as a subchloride (Cs
2Cl). In reality, the product was probably a colloidal mixture of the metal and caesium chloride.[64] The electrolysis of the aqueous solution of chloride with a mercury anode produced a caesium amalgam which readily decomposed under the aqueous conditions.[62] The pure metal was eventually isolated by the German chemist Carl Setterberg while working on his doctorate with Kekule and Bunsen.[63] In 1882 he produced caesium metal by electrolyzing caesium cyanide, and thus avoiding the problems with the chloride.[65]

Historically, the most important use for caesium has been in research and development, primarily in chemical and electrical fields. Very few applications existed for caesium until the 1920s when it became used in radio vacuum tubes. It had two functions: as a getter it removed excess oxygen after manufacture, and as a coating on the heated cathode, it increased its electrical conductivity. Caesium did not become recognized as a high-performance industrial metal until the 1950s.[66] Applications of non-radioactive caesium included photoelectric cells, photomultiplier tubes, optical components of infrared spectrophotometers, catalysts for several organic reactions, crystals for scintillation counters, and in magnetohydrodynamic power generators.[13]

A second was defined as: the duration of 9,192,631,770 cycles of microwave light absorbed or emitted by the hyperfine transition of caesium-133 atoms in their ground state undisturbed by external fields

13th General Conference on Weights and Measures, 1967

Since 1967, the International System of Measurements has based its unit of time, the second, on the properties of caesium. The International System of Units (SI) defines the second as 9,192,631,770 cycles of the radiation, which corresponds to the transition between two hyperfine energy levels of the ground state of the caesium-133 atom.[67]

Applications

Petroleum exploration

The largest current end-use of caesium is in caesium formate-based drilling fluids for the extractive oil industry.[citation needed] Aqueous solutions of caesium formate (HCOO-Cs+)—made by reacting caesium hydroxide with formic acid—were developed in the mid-1990s for use as oil well drilling and completion fluids. The function of caesium formate as a drilling fluid is to lubricate drill bits, to bring rock cuttings to the surface, and to maintain pressure on the formation during drilling of the well; as completion fluid (which refers to the emplacement of control hardware after drilling but prior to production) is to maintain the pressure.[13]

The high density of the caesium formate brine (up to 2.3 g·cm−3, or 19.2 pounds per gallon),[68] coupled with the relatively benign nature of most caesium compounds, reduces the requirement for toxic high-density suspended solids in the drilling fluid—a significant technological, engineering and environmental advantage. Unlike the components of many other heavy liquids, caesium formate is relatively environment-friendly.[68] The caesium formate brine can be blended with potassium and sodium formates to decrease the density of the fluids down to that of water (1.0 g·cm−3, or 8.3 pounds per gallon). Furthermore, it is biodegradable and reclaimable, and may be recycled, which is important in view of its high cost (about $4,000 per barrel in 2001).[69] Alkali formates are safe to handle and do not damage the producing formation or downhole metals as their corrosive alternative, high-density brines (such as zinc bromide ZnBr
2 solutions),sometimes do; they also require less cleanup and disposal costs.[13]

Atomic clocks

A room with a black box in the foreground and six control cabinets with space for five to six racks each. Most, but not all, of the cabinets are filled with white boxes.
Atomic clock ensemble at the U.S. Naval Observatory
A laboratory table with some optical devices on it.
FOCS-1, a continuous cold caesium fountain atomic clock in Switzerland, started operating in 2004 at an uncertainty of one second in 30 million years

Caesium-based atomic clocks observe electromagnetic transitions in the hyperfine structure of caesium-133 atoms and use it as a reference point. The first accurate caesium clock was built by Louis Essen in 1955 at the National Physical Laboratory in the UK.[70] Since then, they have been improved repeatedly over the past half-century, and form the basis for standards-compliant time and frequency measurements. These clocks measure frequency with an accuracy of 2 to 3 parts in 1014, which would correspond to a time measurement accuracy of 2 nanoseconds per day, or one second in 1.4 million years. The latest versions in the United States and France are accurate to 1.7 parts in 1015, which means they would be off by about 4 seconds since the extinction of the dinosaurs 65 million years ago,[13] and has been regarded as "the most accurate realization of a unit that mankind has yet achieved."[67]

Caesium clocks are also used in networks that oversee the timing of cell phone transmissions and the information flow on the Internet.[71]

Electric power and electronics

Caesium vapor thermionic generators are low-power devices that convert heat energy to electrical energy. In the two-electrode vacuum tube converter, it neutralizes the space charge that builds up near the cathode, and in doing so, it enhances the current flow.[72]

Caesium is also important for its photoemissive properties by which light energy is converted to electron flow. It is used in photoelectric cells because caesium-based cathodes such as the intermetallic compound K
2CsSb have low threshold voltage for emission of electrons.[73] The range of photoemissive devices using caesium include optical character recognition devices, photomultiplier tubes, and video camera tubes.[74][75] Nevertheless, germanium, rubidium, selenium, silicon, tellurium, and several other elements can substitute caesium in photosensitive materials.[13]

Caesium iodide (CsI) and bromide (CsBr) crystals are employed in scintillation counters widely used in mineral exploration and particle physics research as they are well suited for the detection of gamma and x-ray radiation. Caesium vapor is used in many common magnetometers.[76] The element is also used as an internal standard in spectrophotometry.[77] Like other alkali metals, caesium has a great affinity for oxygen and is used as a "getter" in vacuum tubes.[78] Other uses of the metal include high-energy lasers, vapor glow lamps, and vapor rectifiers.[13]

Centrifugation fluids

Because of their high density, solutions of caesium chloride (CsCl), sulfate (Cs
2SO
4), and trifluoroacetate (Cs(O
2CCF
3)) are commonly used in molecular biology for density gradient ultracentrifugation.[79] This technology is primarily applied to the isolation of viral particles, sub-cellular organelles and fractions, and nucleic acids from biological samples.[80]

Chemical and medical use

Some fine white powder on a laboratory watch glass
A sample of caesium chloride

Relatively few chemical applications exist for caesium.[81] Doping with caesium compounds is used to enhance the effectiveness of several metal-ion catalysts used in the production of chemicals, such as acrylic acid, anthraquinone, ethylene oxide, methanol, phthalic anhydride, styrene, methyl methacrylate monomers, and various olefins. It is also used in the catalytic conversion of sulfur dioxide into sulfur trioxide in the production of sulfuric acid.[citation needed]

Caesium fluoride enjoys niche use in organic chemistry as a base,[21] or as an anhydrous source of fluoride ion.[82] Caesium salts sometimes replace potassium or sodium salts in organic synthesis, such as cyclization, esterification, and polymerization.

Nuclear and isotope applications

Caesium-137 is a very common radioisotope used as a gamma-emitter in industrial applications. Its advantages include a half-life of roughly 30 years, its availability from the nuclear fuel cycle, and having 137Ba as stable end product. The high water solubility is a disadvantage which makes it incompatible with irradiation of food and medical supplies.[83] It has been used in agriculture, cancer treatment, and the sterilization of food, sewage sludge, and surgical equipment.[13][84] Radioactive isotopes of caesium in radiation devices were used in the medical field to treat certain types of cancer,[85] but emergence of better alternatives and the use of water-soluble caesium chloride in the sources, which would create wide range contamination, gradually put some of these caesium sources out of use.[86][87] Caesium-137 has been employed in a variety of industrial measurement gauges, including moisture, density, leveling, and thickness gauges.[88] It has also been used in well logging devices for measuring the electron density of the rock formations, which is analogous to the bulk density of the formations.[89]

Isotope 137 has also been used in hydrologic studies analogous to those using tritium. It is produced from detonation of nuclear weapons and emissions from nuclear power plants. With the commencement of nuclear testing around 1945, and continuing through the mid-1980s, caesium-137 was released into the atmosphere where it is absorbed readily into solution. Known year-to-year variation within that period allows correlation with soil and sediment layers. Caesium-134, and to a lesser extent caesium-135, have also been used in hydrology as a measure of caesium output by the nuclear power industry. While they are less prevalent than either caesium-133 or caesium-137, these isotopes have the advantage of being produced solely from anthropogenic sources.[90]

Other uses

Electrons shooting out of an electron gun hit neutral fuel nuclei which leads to their ionization; in a chamber surrounded by magnets, the positive ions are directed towards a negative grid which accelerates them; once out of this chamber, the positive ions are neutralized from another electron gun leaving the chamber behind with a significant momentum thus propelling the previous chamber in the opposite direction.
Schematics of an electrostatic ion thruster which was initially developed for use with caesium or mercury

Caesium and mercury were used as a propellant in early ion engines designed for spacecraft propulsion on very long interplanetary or extraplanetary missions. The ionization method was to strip the outer electron from the propellant upon contact with a tungsten electrode that had voltage applied. Concerns about the corrosive action of caesium on spacecraft components have pushed development in the direction of use of inert gas propellants such as xenon; this is easier to handle in ground-based tests and has less potential to interfere with the spacecraft.[13] Eventually, xenon was used in the experimental spacecraft Deep Space 1 launched in 1998.[91][92] Nevertheless, field emission electric propulsion thrusters which use a simple system of accelerating liquid metal ions such as of caesium to create thrust have been built.[93]

Caesium nitrate is used as an oxidizer and pyrotechnic colorant to burn silicon in infrared flares[94] such as the LUU-19 flare,[95] because it emits much of its light in the near infrared spectrum.[96] Caesium has been used to reduce the radar signature of exhaust plumes in the SR-71 Blackbird military aircraft.[97] Caesium, along with rubidium, has been added as carbonates to glass because it reduces electrical conductivity and improves stability and durability of fiber optics and night vision devices. Caesium fluoride or caesium aluminium fluoride are used in fluxes formulated for the brazing of aluminium alloys that contain magnesium.[13]

Prognostications

Magnetohydrodynamic (MHD) power-generating systems were researched but failed to gain widespread acceptance.[98] Caesium metal has also been considered as the working fluid in high-temperature Rankine cycle turboelectric generators.[99] Caesium salts have been evaluated as antishock reagents to be used following the administration of arsenical drugs. Because of their effect on heart rhythms, however, they are less likely to be used than potassium or rubidium salts. They have also been used to treat epilepsy.[13]

Health and safety hazards

Graph of percentage of the radioactive output by each nuclide that form after a nuclear fallout vs logarithm of time after the incident. In curves of various colors, the predominant source of radiation are depicted in order: Te-132/I-132 for the first five or so days; I-131 for the next five; Ba-140/La-140 briefly; Zr-95/Nb-95 from day 10 until about day 200; and finally Cs-137. Other nuclides producing radioactivity, but not peaking as a major component are Ru, peaking at about 50 days, and Cs-134 at around 600 days.
The portion of the total radiation dose (in air) contributed by each isotope versus time after the Chernobyl disaster depicting caesium-137 becoming the largest source of radiation about 200 days after the accident[100]

Caesium compounds are rarely encountered by most persons but most caesium compounds are mildly toxic because of chemical similarity of caesium to potassium. Exposure to large amounts of caesium compounds can cause hyperirritability and spasms, but as such amounts would not ordinarily be encountered in natural sources, caesium is not a major chemical environmental pollutant.[101] The median lethal dose (LD50) value for caesium chloride in mice is 2.3 g per kilogram, which is comparable to the LD50 values of potassium chloride and sodium chloride.[102]

NFPA 704
NFPA 704
safety square
NFPA 704 four-colored diamondHealth 3: Short exposure could cause serious temporary or residual injury. E.g. chlorine gasFlammability 3: Liquids and solids that can be ignited under almost all ambient temperature conditions. Flash point between 23 and 38 °C (73 and 100 °F). E.g. gasolineInstability 2: Undergoes violent chemical change at elevated temperatures and pressures, reacts violently with water, or may form explosive mixtures with water. E.g. white phosphorusSpecial hazards (white): no code
3
3
2
The fire diamond hazard sign for caesium metal

Caesium metal is one of the most reactive elements and is highly explosive when it comes in contact with water. The hydrogen gas produced by the reaction is heated by the thermal energy released at the same time, causing ignition and a violent explosion. This can occur with other alkali metals, but caesium is so potent that this explosive reaction can even be triggered by cold water.[13] The metal is highly pyrophoric, and ignites spontaneously in air to form caesium hydroxide and various oxides. Caesium hydroxide is a very strong base, and can rapidly corrode glass.[17]

The isotopes 134 and 137 (present in the biosphere in small amounts from radiation leaks) represent a radioactivity burden which varies depending on location. Radiocaesium does not accumulate in the body as effectively as many other fission products (such as radioiodine and radiostrontium). As with other alkali metals, radiocaesium washes out of the body relatively quickly with the sweat and urine. However, radiocaesium follows potassium and tends to accumulate in plant tissues, including fruits and vegetables.[103][104][105] Accumulation of caesium-137 in lakes has been a high concern after the Chernobyl disaster.[106][107] Experiments with dogs showed that a single dose of 3800 μCi (4.1 μg of caesium-137) per kilogram is lethal within three weeks,[108] smaller amounts may cause infertility and cancer.[109] The International Atomic Energy Agency and other sources have warned that radioactive materials, such as caesium-137, could be used in radiological dispersion devices, or “dirty bombs”.[110]

See also

Template:Wikipedia-Books

Wikisource has the text of the 1911 Encyclopædia Britannica article "Caesium".

Notes

  1. ^ Caesium is the spelling recommended by the International Union of Pure and Applied Chemistry (IUPAC).[9] The American Chemical Society (ACS) has used the spelling cesium since 1921,[10][11] following Webster’s Third New International Dictionary.
  2. ^ Along with rubidium (39 °C [102 °F]), francium (27 °C [81 °F]), mercury (−39 °C [−38 °F]), and gallium (30 °C [86 °F]); bromine is also liquid at room temperature (melting at −7.2 °C, 19 °F) but it is a halogen, not a metal.[12]
  3. ^ The radioactive element francium may also have a lower melting point, but its radioactivity prevents enough of it from being isolated for direct testing.[15]
  4. ^ Francium may be more electropositive, but this has not been experimentally measured due to its high radioactivity. Measurements of the first ionization energy of francium suggest that relativistic effects may lower its reactivity and raise its electronegativity above that expected from periodic trends.[23]
  5. ^ Bunsen quotes Aulus Gellius Noctes Atticae II, 26 by Nigidius Figulus: Nostris autem veteribus caesia dicts est quae Graecis, ut Nigidus ait, de colore coeli quasi coelia.

References

  1. ^ "Standard Atomic Weights: Caesium". CIAAW. 2013.
  2. ^ Prohaska, Thomas; Irrgeher, Johanna; Benefield, Jacqueline; Böhlke, John K.; Chesson, Lesley A.; Coplen, Tyler B.; Ding, Tiping; Dunn, Philip J. H.; Gröning, Manfred; Holden, Norman E.; Meijer, Harro A. J. (2022-05-04). "Standard atomic weights of the elements 2021 (IUPAC Technical Report)". Pure and Applied Chemistry. doi:10.1515/pac-2019-0603. ISSN 1365-3075.
  3. ^ a b c Arblaster, John W. (2018). Selected Values of the Crystallographic Properties of Elements. Materials Park, Ohio: ASM International. ISBN 978-1-62708-155-9.
  4. ^ Haynes, William M., ed. (2011). CRC Handbook of Chemistry and Physics (92nd ed.). Boca Raton, FL: CRC Press. p. 4.121. ISBN 1-4398-5511-0.
  5. ^ Dye, J. L. (1979). "Compounds of Alkali Metal Anions". Angewandte Chemie International Edition. 18 (8): 587–598. doi:10.1002/anie.197905871.
  6. ^ "Magnetic susceptibility of the elements and inorganic compounds". Handbook of Chemistry and Physics (PDF) (87th ed.). CRC press. ISBN 0-8493-0487-3. Retrieved 2010-09-26.
  7. ^ Kondev, F. G.; Wang, M.; Huang, W. J.; Naimi, S.; Audi, G. (2021). "The NUBASE2020 evaluation of nuclear properties" (PDF). Chinese Physics C. 45 (3): 030001. doi:10.1088/1674-1137/abddae.
  8. ^ "NIST Radionuclide Half-Life Measurements". NIST. Retrieved 2011-03-13.
  9. ^ International Union of Pure and Applied Chemistry (2005). Nomenclature of Inorganic Chemistry (IUPAC Recommendations 2005). Cambridge (UK): RSC–IUPAC. ISBN 0-85404-438-8. pp. 248–49. Electronic version..
  10. ^ Coghill, Anne M.; Garson, Lorrin R., eds. (2006). The ACS Style Guide: Effective Communication of Scientific Information (3rd ed.). Washington, D.C.: American Chemical Society. p. 127. ISBN 0841239991Template:Inconsistent citations{{cite book}}: CS1 maint: postscript (link).
  11. ^ Coplen, T. B.; Peiser, H. S. (1998). "History of the recommended atomic-weight values from 1882 to 1997: a comparison of differences from current values to the estimated uncertainties of earlier values" (PDF). Pure Appl. Chem. 70 (1): 237–257. doi:10.1351/pac199870010237Template:Inconsistent citations{{cite journal}}: CS1 maint: postscript (link).
  12. ^ "Chemical elements listed by melting point". Lenntech. Retrieved 2010-09-27.
  13. ^ a b c d e f g h i j k l m n o p q r s t u v w x y Butterman, William C.; Brooks, William E.; Reese, Jr., Robert G. (2004). "Mineral Commodity Profile: Cesium" (PDF). United States Geological Survey. Retrieved 2009-12-27.
  14. ^ Heiserman, David L. (1992). Exploring Chemical Elements and their Compounds. McGraw-Hill. pp. 201–203. ISBN 0-8306-3015-5.
  15. ^ "Francium". Periodic.lanl.gov. Retrieved 2010-02-23.
  16. ^ a b c d e Kaner, Richard (2003). "C&EN: It's Elemental: The Periodic Table – Cesium". American Chemical Society. Retrieved 2010-02-25.
  17. ^ a b "Chemical Data – Caesium – Cs". Royal Society of Chemistry. Retrieved 2010-09-27.
  18. ^ a b Lynch, Charles T. (1974). CRC Handbook of Materials Science. CRC Press. p. 13. ISBN 9780849323218. Retrieved 2010-09-27. {{cite book}}: Unknown parameter |unused_data= ignored (help)
  19. ^ Taova, T. M.; et al. (June 22, 2003). "Density of melts of alkali metals and their Na-K-Cs and Na-K-Rb ternary systems" (PDF). Fifteenth symposium on thermophysical properties, Boulder, CO, USA. Retrieved 2010-09-26. {{cite web}}: Explicit use of et al. in: |author= (help)
  20. ^ Deiseroth, H. J. (1997). "Alkali metal amalgams, a group of unusual alloys". Progress in Solid State Chemistry. 25 (1–2): 73–123. doi:10.1016/S0079-6786(97)81004-7.
  21. ^ a b c d Greenwood, N.N.; Earnshaw, A. (1984). Chemistry of the Elements. Oxford, UK: Pergamon Press. ISBN 0080220576.
  22. ^ a b c Holleman, Arnold F.; Wiberg, Egon; Wiberg, Nils (1985). "Vergleichende Übersicht über die Gruppe der Alkalimetalle". Lehrbuch der Anorganischen Chemie (in German) (91–100 ed.). Walter de Gruyter. pp. 953–955. ISBN 3110075113.
  23. ^ Andreev, S. V.; Letokhov, V. S.; Mishin, V. I. (1987). "Laser resonance photoionization spectroscopy of Rydberg levels in Fr". Physical Review Letters. 59: 1274–76. doi:10.1103/PhysRevLett.59.1274.
  24. ^ Dye, J. L. (1979). "Compounds of Alkali Metal Anions". Angewandte Chemie International Edition. 18 (8): 587–598. doi:10.1002/anie.197905871.
  25. ^ Köhler, Michael J. (1999). Etching in microsystem technology. Wiley-VCH. p. 90. ISBN 3-527-29561-5.
  26. ^ Bruce Moyer, Joseph Birdwell, Peter Bonnesen and Laetitia Delmau "Use of Macrocycles in Nuclear-Waste Cleanup: A Realworld Application of a Calixcrown in Cesium Separation Technology" Macrocyclic Chemistry 2005, 383–405. doi:10.1007/1-4020-3687-6_24.
  27. ^ Wells, A.F. (1984). Structural Inorganic Chemistry (5 ed.). Oxford Science Publications. ISBN 0-19-855370-6.
  28. ^ Cotton, F. Albert (1962). Advanced Inorganic Chemistry. John Wiley & Sons, Inc. p. 318. ISBN 0471849979. {{cite book}}: Unknown parameter |coauthors= ignored (|author= suggested) (help)
  29. ^ Lide, David R., ed. (2006). CRC Handbook of Chemistry and Physics (87th ed.). Boca Raton, FL: CRC Press. pp. 451, 514. ISBN 0-8493-0487-3.
  30. ^ a b Tsai, Khi-Ruey; Harris, P. M.; Lassettre, E. N. (1956). "The Crystal Structure of Cesium Monoxide". Journal of Physical Chemistry. 60: 338–344. doi:10.1021/j150537a022.
  31. ^ "Information Bridge: DOE Scientific and Technical Information" (PDF). Office of Scientific and Technical Information — U.S. Department of Energy. 2009-11-23. Retrieved 2010-02-15.
  32. ^ Vol'nov, I. I.; Matveev, V. V. (1963). "Synthesis of cesium ozonide through cesium superoxide". Bulletin of the Academy of Sciences, USSR Division of Chemical Science. 12: 1040–1043. doi:10.1007/BF00845494.
  33. ^ Tokareva, S. A. (1971). "Alkali and Alkaline Earth Metal Ozonides". Russian Chemical Reviews. 40: 165–174. doi:10.1070/RC1971v040n02ABEH001903.
  34. ^ Simon, A. (1997). "Group 1 and 2 Suboxides and Subnitrides — Metals with Atomic Size Holes and Tunnels". Coordination Chemistry Reviews. 163: 253–270. doi:10.1016/S0010-8545(97)00013-1.
  35. ^ Tsai, Khi-Ruey; Harris, P. M.; Lassettre, E. N. (1956). "The Crystal Structure of Tricesium Monoxide". Journal of Physical Chemistry. 60: 345–347. doi:10.1021/j150537a023.
  36. ^ Okamoto, H. (2009). "Cs-O (Cesium-Oxygen)". Journal of Phase Equilibria and Diffusion. 31: 86. doi:10.1007/s11669-009-9636-5.
  37. ^ Band, A.; Albu-Yaron, A.; Livneh, T.; Cohen, H.; Feldman, Y.; Shimon, L.; Popovitz-Biro, R.; Lyahovitskaya, V.; Tenne, R. (2004). "Characterization of Oxides of Cesium". The Journal of Physical Chemistry B. 108: 12360–12367. doi:10.1021/jp036432o.
  38. ^ Brauer, G. (1947). "Untersuchungen ber das System Csium-Sauerstoff". Zeitschrift fr anorganische Chemie. 255: 101. doi:10.1002/zaac.19472550110.
  39. ^ Busso, M.; Gallino, R.; Wasserburg, G. J. (1999). "Nucleosynthesis in Asymptotic Giant Branch Stars: Relevance for Galactic Enrichment and Solar System Formation" (PDF). Annula Review of Astronomy and Astrophysics. 37: 239–309. doi:10.1146/annurev.astro.37.1.239. Retrieved 2010-02-20.{{cite journal}}: CS1 maint: multiple names: authors list (link)
  40. ^ Arnett, David (1996). Supernovae and Nucleosynthesis: An Investigation of the History of Matter, from the Big Bang to the Present. Princeton University Press. p. 527. ISBN 0-691-01147-8.
  41. ^ Goff, C (1996). "Complexation of caesium and rubidium cations with crown ethers in N,N-dimethylformamide". Polyhedron. 15: 3897. doi:10.1016/0277-5387(96)00018-6.
  42. ^ Brown, F.; Hall, G.R.; Walter, A.J. (1955). "The half-life of Cs137". Journal of Inorganic and Nuclear Chemistry. 1: 241–247. doi:10.1016/0022-1902(55)80027-9.
  43. ^ Sonzogni, Alejandro. "Interactive Chart of Nuclides". National Nuclear Data Center: Brookhaven National Laboratory. Retrieved 2008-06-06.
  44. ^ Ohki, Shigeo; Takaki, Naoyuki (14–16 October 2002). Transmutation of Cesium-135 with Fast Reactors (PDF). Seventh Information Exchange Meeting on Actinide and Fission Product Partitioning and Transmutation. Jeju, Korea. Retrieved 2010-09-26.
  45. ^ "20 Xenon: A Fission Product Poison". CANDU Fundamentals (PDF) (Report). CANDU Owners Group Inc. Retrieved 2010-09-15.
  46. ^ Taylor, V. F.; Evans, R. D.; Cornett, R. J. (2008). "Preliminary evaluation of 135Cs/137Cs as a forensic tool for identifying source of radioactive contamination". Journal of Environmental Radioactivity. 99 (1): 109–118. doi:10.1016/j.jenvrad.2007.07.006. PMID 17869392.
  47. ^ "Cesium | Radiation Protection". U.S. Environmental Protection Agency. 2006-06-28. Retrieved 2010-02-15.
  48. ^ Zerriffi, Hisham (2000-05-24). IEER Report: Transmutation – Nuclear Alchemy Gamble (Report). Institute for Energy and Environmental Research. Retrieved 2010-02-15.
  49. ^ Chernobyl's Legacy: Health, Environmental and Socia-Economic Impacts and Recommendations to the Governments of Belarus, Russian Federation and Ukraine (PDF) (Report). International Atomic Energy Agency. Retrieved 2010-02-18.
  50. ^ Kase, Takeshi; Konashi, Kenji; Takahashi, Hiroshi; Hirao, Yasuo (1993). "Transmutation of Cesium-137 Using Proton Accelerator". Journal of Nuclear Science and Technology. 30 (9): 911–918. doi:10.3327/jnst.30.911.
  51. ^ Knief, Ronald Allen (1992). "Fission Fragments". Nuclear engineering: theory and technology of commercial nuclear power. Taylor & Francis. p. 42. ISBN 9781560320883. Retrieved 2010-09-26.
  52. ^ Ishiwatari, N.; Nagai, H. "Release of xenon-137 and iodine-137 from UO2 pellet by pulse neutron irradiation at NSRR". Nippon Genshiryoku Gakkaishi. 23 (11): 843–850. Retrieved 2010-01-01.
  53. ^ Turekian, K.K.; Wedepohl, K. H. (1961). "Distribution of the elements in some major units of the Earth's crust". Geological Society of America Bulletin. 72 (2): 175–192. doi:10.1130/0016-7606(1961)72[175:DOTEIS]2.0.CO;2.
  54. ^ Rowland, Simon (1998-07-04). "Cesium as a Raw Material: Occurrence and Uses". Artemis Society International. Retrieved 2010-02-15.
  55. ^ a b Černý, Petr; Simpson, F. M. (1978). "The Tanco Pegmatite at Bernic Lake, Manitoba: X. Pollucite" (PDF). Canadian Mineralogist. 16: 325–333. Retrieved 2010-09-26.
  56. ^ a b c d Polyak, Désirée E. "Cesium" (PDF). United States Geological Survey. Retrieved 2009-10-17.
  57. ^ Norton, J. J. (1973). "Lithium, cesium, and rubidium—The rare alkali metals". In Brobst, D. A., and Pratt, W. P. (ed.). United States mineral resources. Vol. Paper 820. U.S. Geological Survey Professional. pp. 365–378. Retrieved 2010-09-26.{{cite book}}: CS1 maint: multiple names: editors list (link)
  58. ^ a b Burt, R. O. (1993). "Caesium and cesium compounds". Kirk-Othmer encyclopedia of chemical technology. Vol. 5 (4th ed.). New York: John Wiley & Sons, Inc. pp. 749–764. ISBN 9780471484943.
  59. ^ Benton, William; Turner, Jim (2000). "Cesium formate fluid succeeds in North Sea HPHT field trials" (PDF). Drilling Contractor (May/June): 38–41. Retrieved 2010-09-26.
  60. ^ a b transl. and rev. by Eagleson, Mary (1994). Concise encyclopedia chemistry. Berlin: de Gruyter. p. 198. ISBN 9783110114515. Retrieved 2010-09-26.
  61. ^ Oxford English Dictionary, 2nd Edition
  62. ^ a b c d Kirchhoff, G.; Bunsen, R. (1861). "Chemische Analyse durch Spectralbeobachtungen". Annalen der Physik und Chemie. 189 (7): 337–381. doi:10.1002/andp.18611890702.
  63. ^ a b Weeks, Mary Elvira (1932). "The discovery of the elements. XIII. Some spectroscopic discoveries". Journal of Chemical Education. 9 (8): 1413–1434. doi:10.1021/ed009p1413.
  64. ^ Zsigmondy, Richard (2007). Colloids and the Ultra Microscope. Read books. p. 69. ISBN 978-1-4067-5938-9. Retrieved 2010-09-26.
  65. ^ Setterberg, Carl (1882). "Ueber die Darstellung von Rubidium- und Cäsiumverbindungen und über die Gewinnung der Metalle selbst". Justus Liebig's Annalen der Chemie. 211: 100–116. doi:10.1002/jlac.18822110105.
  66. ^ Strod, A.J. (1957). "Cesium—A new industrial metal". American Ceramic Bulletin. 36 (6): 212–213.
  67. ^ a b "Cesium Atoms at Work". Time Service Department—U.S. Naval Observatory—Department of the Navy. Retrieved 2009-12-20.
  68. ^ a b Downs, J. D.; Blaszczynski, M.; Turner, J.; Harris, M. (2006). Drilling and Completing Difficult HP/HT Wells With the Aid of Cesium Formate Brines-A Performance Review. IADC/SPE Drilling Conference. Miami, Florida, USASociety of Petroleum Engineers. doi:10.2118/99068-MS. Archived from the original on 2007-10-12. {{cite conference}}: Unknown parameter |month= ignored (help)
  69. ^ Flatern, Rick (2001). "Keeping cool in the HPHT environment". Offshore Engineer (February): 33–37.
  70. ^ Essen, L.; Parry, J.V.L. (1955). "An Atomic Standard of Frequency and Time Interval: A Caesium Resonator". Nature. 176: 280. doi:10.1038/176280a0.
  71. ^ Reel, Monte (2003-07-22). "Where timing truly is everything". Washington Post. p. B1. Retrieved 2010-01-26.
  72. ^ Rasor, Ned S.; Warner, Charles (September 1964). "Correlation of Emission Processes for Adsorbed Alkali Films on Metal Surfaces". Journal of Applied Physics. 35 (9): 2589–2600. doi:10.1063/1.1713806.
  73. ^ "Cesium Supplier & Technical Information". American Elements. Retrieved 2010-01-25.
  74. ^ Smedley, John; Rao, Triveni; Wang, Erdong; Crabb, Donald G.; Prok, Yelena; Poelker, Matt; Liuti, Simonetta; Day, Donal B.; Zheng, Xiaochao (2009). "K 2CsSb Cathode Development". American Institute of Physics Conference Proceedings. 1149: 1062–1066. doi:10.1063/1.3215593.
  75. ^ Görlich, P. (1936). "Über zusammengesetzte, durchsichtige Photokathoden". Zeitschrift für Physik. 101: 335–342. doi:10.1007/BF01342330.
  76. ^ Groeger, S.; Pazgalev, A. S.; Weis, A. (2005). "Comparison of discharge lamp and laser pumped cesium magnetometers". Applied Physics B. 80: 645–654. doi:10.1007/s00340-005-1773-x.
  77. ^ Haven, Mary C.; Tetrault, Gregory A.; Schenken, Jerald R. (1994). "Internal Standards". Laboratory instrumentation. New York: John Wiley and Sons. p. 108. ISBN 9780471285724. Retrieved 2010-09-26.
  78. ^ McGee, James D. (1969). Photo-electronic image devices: proceedings of the fourth symposium held at Imperial College, London, September 16–20, 1968. Vol. 1. Academic Press. p. 391. ISBN 9780120145287. Retrieved 2010-09-26. {{cite book}}: |work= ignored (help)
  79. ^ Manfred Bick, Horst Prinz, "Cesium and Cesium Compounds" in Ullmann's Encyclopedia of Industrial Chemistry 2005, Wiley-VCH, Weinheim. doi:10.1002/14356007.a06 153.
  80. ^ Desai, Mohamed A., ed. (2000). "Gradient Materials". Downstream processing methods. Totowa, N.J.: Humana Press. pp. 61–62. ISBN 9780896035645. Retrieved 2010-09-26.
  81. ^ Burt, R. O. (1993). "Cesium and cesium compounds". Kirk-Othmer encyclopedia of chemical technology. Vol. 5 (4th ed.). New York: John Wiley & Sons. p. 759. ISBN 978-0-471-15158-6.
  82. ^ Gregory K. Friestad, Bruce P. Branchaud, Walter Navarrini, Maurizio Sansotera "Cesium Fluoride" in Encyclopedia of Reagents for Organic Synthesis 2007, John Wiley & Sons. doi:10.1002/047084289X.rc050.pub2
  83. ^ Okumura, Takeshi (2003-10-21). "The material flow of radioactive cesium-137 in the U.S. 2000" (PDF). United States Environmental Protection Agency. Retrieved 2009-12-20.
  84. ^ Jensen, N. L. (1985). Cesium, in Mineral facts and problems. Vol. Bulletin 675. U.S. Bureau of Mines. pp. 133–138.
  85. ^ "IsoRay's Cesium-131 Medical Isotope Used In Milestone Procedure Treating Eye Cancers At Tufts-New England Medical Center". Medicalnewstoday.com. 2007-12-17. Retrieved 2010-02-15.
  86. ^ Bentel, Gunilla Carleson (1996). "Caesium-137 Machines". Radiation therapy planning. McGraw-Hill Professional. p. 22. ISBN 9780070051157. Retrieved 2010-09-26. {{cite book}}: More than one of |pages= and |page= specified (help)
  87. ^ National Research Council (U.S.). Committee on Radiation Source Use and Replacement (2008). Radiation source use and replacement: abbreviated version. National Academies Press. ISBN 9780309110143. Retrieved 2010-09-26.
  88. ^ Loxton, R., Pope, P., ed. (1995). "Level and density measurement using non-contact nuclear gauges". Instrumentation : A Reader. London: Chapman & Hall. pp. 82–85. ISBN 9780412534003. Retrieved 2010-09-26.{{cite book}}: CS1 maint: multiple names: editors list (link)
  89. ^ Timur, A.; Toksoz, M. N. (1985). "Downhole Geophysical Logging". Annual Review of Earth and Planetary Sciences. 13: 315. doi:10.1146/annurev.ea.13.050185.001531.
  90. ^ Kendall, Carol. "Isotope Tracers Project – Resources on Isotopes – Cesium". National Research Program – U.S. Geological Survey. Retrieved 2010-01-25. {{cite journal}}: Cite journal requires |journal= (help)
  91. ^ Marcucci, M. G.; Polk, J. E. (2000). "NSTAR Xenon Ion Thruster on Deep Space 1: Ground and flight tests (invited)". Review of Scientific Instruments. 71: 1389–1400. doi:10.1063/1.1150468.
  92. ^ Sovey, James S.; Rawlin, Vincent K.; Patterson, Michael J. "A Synopsis of Ion Propulsion Development Projects in the United States: SERT I to Deep Space I" (PDF). NASA. Retrieved 2009-12-12.
  93. ^ In-FEEP Thruster Ion Beam Neutralization with Thermionic and Field Emission Cathodes (PDF). 27th International Electric Propulsion Conference. Pasadena, California. 2001. pp. 1–15. Retrieved 2010-09-26. {{cite conference}}: Unknown parameter |month= ignored (help)
  94. ^ "Infrared illumination compositions and articles containing the same". United States Patent 6230628. Freepatentsonline.com. Retrieved 2010-01-25.
  95. ^ "LUU-19 Flare". Federation of American Scientists. 2000-04-23. Retrieved 2009-12-12.
  96. ^ Charrier, E.; Charsley, E.L.; Laye, P.G.; Markham, H.M.; Berger, B.; Griffiths, T.T. (2006). "Determination of the temperature and enthalpy of the solid–solid phase transition of caesium nitrate by differential scanning calorimetry". Thermochimica Acta. 445: 36–39. doi:10.1016/j.tca.2006.04.002.
  97. ^ Crickmore, Paul F. (2000). Lockheed SR-71: the secret missions exposed. Osprey. p. 47. ISBN 9781841760988.
  98. ^ National Research Council (U.S.) (2001). Energy research at DOE—Was it worth it?. National Academy Press. pp. 190–194. ISBN 9780309074483. Retrieved 2010-09-26.
  99. ^ Roskill Information Services (1984). Economics of Caesium and Rubidium (Reports on Metals & Minerals). London, United Kingdom: Roskill Information Services. p. 51. ISBN 9780862142506.
  100. ^ Data from the OECD report and The radiochemical Manual (2nd ed.) B.J. Wilson (1966).
  101. ^ Pinsky, Carl; Bose, Ranjan; Taylor, J. R.; McKee, Jasper; Lapointe, Claude; Birchall, James (1981). "Cesium in mammals: Acute toxicity, organ changes and tissue accumulation". Journal of Environmental Science and Health, Part A. 16: 549–567. doi:10.1080/10934528109375003.
  102. ^ Johnson, Garland T.; Lewis, Trent R.; Wagner, D. Wagner (1975). "Acute toxicity of cesium and rubidium compounds". Toxicology and Applied Pharmacology. 32 (2): 239–245. doi:10.1016/0041-008X(75)90216-1. PMID 1154391.
  103. ^ Nishita, H.; Dixon, D.; Larson, K. H. (1962). "Accumulation of Cs and K and growth of bean plants in nutrient solution and soils". Plant and Soil. 17: 221–242. doi:10.1007/BF01376226.
  104. ^ Avery, S. (1996). "Fate of caesium in the environment: Distribution between the abiotic and biotic components of aquatic and terrestrial ecosystems". Journal of Environmental Radioactivity. 30: 139–171. doi:10.1016/0265-931X(96)89276-9.
  105. ^ Salbu, Brit; Østby, Georg; Garmo, Torstein H.; Hove, Knut (1992). "Availability of caesium isotopes in vegetation estimated from incubation and extraction experiments". Analyst. 117 (3): 487–491. doi:10.1039/AN9921700487. PMID 1580386.
  106. ^ Smith, Jim T.; Beresford, Nicholas A. Chernobyl: Catastrophe and Consequences. Berlin: Springer. ISBN 3540238662.
  107. ^ Eremeev, V. N.; Chudinovskikh, T. V.; Batrakov, G. F.; Ivanova, T. M. (1991). "Radioactive isotopes of caesium in the waters and near-water atmospheric layer of the Black Sea". Physical Oceanography. 2 (1): 57–64. doi:10.1007/BF02197418.
  108. ^ Redman, H. C.; McClellan, R. O.; Jones, R. K.; Boecker, B. B.; Chiffelle, T. L.; Pickrell, J. A.; Rypka, E. W. (1972). "Toxicity of 137-CsCl in the Beagle. Early Biological Effects" (subscription required). Radiation Research. 50 (3): 629–648. doi:10.2307/3573559. PMID 5030090. Retrieved 2010-09-26.
  109. ^ "Asia-Pacific | Chinese 'find' radioactive ball". BBC News. 2009-03-27. Retrieved 2010-01-25.
  110. ^ Charbonneau, Louis (2003-03-12). "IAEA director warns of "dirty bomb" risk". Washington Post. Reuters. p. A15. Retrieved 2010-04-28. {{cite news}}: Text "date 2003-03-12" ignored (help)
Wikimedia Commons has media related to Caesium.
Look up caesium in Wiktionary, the free dictionary.

Template:Link FA

Retrieved from "http://en.wiki.x.io/w/index.php?title=Caesium&oldid=399476767"