Jump to content

Intermetallic

From Wikipedia, the free encyclopedia
(Redirected from Inter-metallic alloy)
Cr11Ge19

An intermetallic (also called intermetallic compound, intermetallic alloy, ordered intermetallic alloy, long-range-ordered alloy) is a type of metallic alloy that forms an ordered solid-state compound between two or more metallic elements. Intermetallics are generally hard and brittle, with good high-temperature mechanical properties.[1][2][3] They can be classified as stoichiometric or nonstoichiometic intermetallic compounds.[1]

Although the term "intermetallic compounds", as it applies to solid phases, has been in use for many years, Hume-Rothery has argued that it gives misleading intuition, suggesting a fixed stoichiometry and even a clear decomposition into species.[4]

Definitions

[edit]

Research definition

[edit]

Schulze in 1967[5] defined intermetallic compounds as solid phases containing two or more metallic elements, with optionally one or more non-metallic elements, whose crystal structure differs from that of the other constituents. Under this definition, the following are included:

  1. Electron (or Hume-Rothery) compounds
  2. Size packing phases. e.g. Laves phases, Frank–Kasper phases and Nowotny phases
  3. Zintl phases

The definition of a metal is taken to include:

  1. post-transition metals, i.e. aluminium, gallium, indium, thallium, tin, lead, and bismuth.
  2. metalloids, e.g. silicon, germanium, arsenic, antimony and tellurium.

Homogeneous and heterogeneous solid solutions of metals, and interstitial compounds such as the carbides and nitrides are excluded under this definition. However, interstitial intermetallic compounds are included, as are alloys of intermetallic compounds with a metal.

Common use

[edit]

In common use, the research definition, including post-transition metals and metalloids, is extended to include compounds such as cementite, Fe3C. These compounds, sometimes termed interstitial compounds, can be stoichiometric, and share similar properties to the intermetallic compounds defined above.[citation needed]

Complexes

[edit]

The term intermetallic is used[6] to describe compounds involving two or more metals such as the cyclopentadienyl complex Cp6Ni2Zn4.

B2

[edit]

A B2 intermetallic compound has equal numbers of atoms of two metals such as aluminium and iron, arranged as two interpenetrating simple cubic lattices of the component metals.[7]

Properties and applications

[edit]

Intermetallic compounds are generally brittle at room temperature and have high melting points. Cleavage or intergranular fracture modes are typical of intermetallics due to limited independent slip systems required for plastic deformation. However, there are some examples of intermetallics with ductile fracture modes such as Nb–15Al–40Ti. Other intermetallics can exhibit improved ductility by alloying with other elements to increase grain boundary cohesion. Alloying of other materials such as boron to improve grain boundary cohesion can improve ductility in many intermetallics.[8] They often offer a compromise between ceramic and metallic properties when hardness and/or resistance to high temperatures is important enough to sacrifice some toughness and ease of processing. They can also display desirable magnetic and chemical properties, due to their strong internal order and mixed (metallic and covalent/ionic) bonding, respectively. Intermetallics have given rise to various novel materials developments. Some examples include alnico and the hydrogen storage materials in nickel metal hydride batteries. Ni3Al, which is the hardening phase in the familiar nickel-base super alloys, and the various titanium aluminides have also attracted interest for turbine blade applications, while the latter is also used in very small quantities for grain refinement of titanium alloys. Silicides, inter-metallic involving silicon, are utilized as barrier and contact layers in microelectronics.[9]

Physical properties of intermetallics[1]
Intermetallic Compound Melting Temperature

(°C)

Density

(kg/m3)

Young's Modulus (GPa)
FeAl 1250–1400 5600 263
Ti3Al 1600 4200 210
MoSi2 2020 6310 430

Examples

[edit]
  1. Magnetic materials e.g. alnico, sendust, Permendur, FeCo, Terfenol-D
  2. Superconductors e.g. A15 phases, niobium-tin
  3. Hydrogen storage e.g. AB5 compounds (nickel metal hydride batteries)
  4. Shape memory alloys e.g. Cu-Al-Ni (alloys of Cu3Al and nickel), Nitinol (NiTi)
  5. Coating materials e.g. NiAl
  6. High-temperature structural materials e.g. nickel aluminide, Ni3Al
  7. Dental amalgams, which are alloys of intermetallics Ag3Sn and Cu3Sn
  8. Gate contact/ barrier layer for microelectronics e.g. TiSi2[10]
  9. Laves phases (AB2), e.g., MgCu2, MgZn2 and MgNi2.

The formation of intermetallics can cause problems. For example, intermetallics of gold and aluminium can be a significant cause of wire bond failures in semiconductor devices and other microelectronics devices. The management of intermetallics is a major issue in the reliability of solder joints between electronic components.[citation needed]

Intermetallic particles

[edit]
Main article: Intermetallic particle

Intermetallic particles often form during solidification of metallic alloys, and can be used as a dispersion strengthening mechanism.[1]

History

[edit]

Examples of intermetallics through history include:

  1. Roman yellow brass, CuZn
  2. Chinese high tin bronze, Cu31Sn8
  3. Type metal, SbSn
  4. Chinese white copper, CuNi [11]

German type metal is described as breaking like glass, not bending, softer than copper but more fusible than lead.[12] The chemical formula does not agree with the one above; however, the properties match with an intermetallic compound or an alloy of one.[citation needed]

See also

[edit]

References

[edit]
  • Gerhard Sauthoff: Intermetallics, Wiley-VCH, Weinheim 1995, 165 pages
  • Intermetallics, Gerhard Sauthoff, Ullmann's Encyclopedia of Industrial Chemistry, Wiley Interscience. (Subscription required)
  1. ^ a b c d Askeland, Donald R.; Wright, Wendelin J. (January 2015). "11-2 Intermetallic Compounds". The science and engineering of materials (Seventh ed.). Boston, MA. pp. 387–389. ISBN 978-1-305-07676-1. OCLC 903959750.{{cite book}}: CS1 maint: location missing publisher (link)
  2. ^ Panel On Intermetallic Alloy Development, Commission On Engineering And Technical Systems (1997). Intermetallic alloy development : a program evaluation. National Academies Press. p. 10. ISBN 0-309-52438-5. OCLC 906692179.
  3. ^ Soboyejo, W. O. (2003). "1.4.3 Intermetallics". Mechanical properties of engineered materials. Marcel Dekker. ISBN 0-8247-8900-8. OCLC 300921090.
  4. ^ Hume-Rothery, W. (1955) [1948]. Electrons, atoms, metals and alloys (revised ed.). London: Louis Cassier Co., Ltd. pp. 316–317 – via the Internet Archive.
  5. ^ G. E. R. Schulze: Metallphysik, Akademie-Verlag, Berlin 1967
  6. ^ Cotton, F. Albert; Wilkinson, Geoffrey; Murillo, Carlos A.; Bochmann, Manfred (1999), Advanced Inorganic Chemistry (6th ed.), New York: Wiley-Interscience, ISBN 0-471-19957-5
  7. ^ "Wings of steel: An alloy of iron and aluminium is as good as titanium, at a tenth of the cost". The Economist. February 7, 2015. Retrieved February 5, 2015. E02715
  8. ^ Soboyejo, W. O. (2003). "12.5 Fracture of Intermetallics". Mechanical properties of engineered materials. Marcel Dekker. ISBN 0-8247-8900-8. OCLC 300921090.
  9. ^ S.P. Murarka, Metallization Theory and Practice for VLSI and ULSI. Butterworth-Heinemann, Boston, 1993.
  10. ^ Milton Ohring, Materials Science of Thin Films, 2nd Edition, Academic Press, San Diego, CA, 2002, p. 692.
  11. ^ "The Art of War by Sun Zi: A Book for All Times". China Today. Archived from the original on 2005-03-07. Retrieved 2022-11-25.
  12. ^ [1] Type-pounding The Penny Cyclopædia of the Society for the Diffusion of Useful Knowledge By Society for the Diffusion of Useful Knowledge (Great Britain), George Long Published 1843
[edit]
Retrieved from "http://en.wiki.x.io/w/index.php?title=Intermetallic&oldid=1258767894"