Jump to content

GNU GRUB

From Wikipedia, the free encyclopedia
(Redirected from GRand Unified Bootloader)
"GRUB" and "PUPA" redirect here. For the life stage of insects, see Pupa. For other uses, see Grub (disambiguation) and Pupa (disambiguation).

GNU GRUB
Original author(s)Erich Boleyn
Developer(s)GNU Project
Initial release1995; 29 years ago (1995)
Stable release
2.12[1] Edit this on Wikidata / 20 December 2023
Preview release
2.12-rc1[2] Edit this on Wikidata / 10 July 2023
Repository
Written inAssembly, C[3]
Operating systemLinux, GNU/Hurd, macOS, BSD, (Solaris/ illumos (x86 port)), and Windows (through chainloading)
PlatformIA-32, x86-64, IA-64, ARM, PowerPC, s390x, MIPS, RISC-V, LoongArch and SPARC
Available inEnglish and others
TypeBootloader
License2007: GPL-3.0-or-later[a][5]
1999: GPL-2.0-or-later[b]
Websitewww.gnu.org/software/grub

GNU GRUB (short for GNU GRand Unified Bootloader, commonly referred to as GRUB) is a boot loader package from the GNU Project. GRUB is the reference implementation of the Free Software Foundation's Multiboot Specification, which provides a user the choice to boot one of multiple operating systems installed on a computer or select a specific kernel configuration available on a particular operating system's partitions.

GNU GRUB was developed from a package called the Grand Unified Bootloader (a play on Grand Unified Theory[6]). It is predominantly used for Unix-like systems.

Operation

[edit]
GRUB2 on MBR-partitioned hard drive; stage 1 (boot.img) can alternatively be written into one of the partition boot sectors.
GRUB2 on a GPT-partitioned hard drive, booting on BIOS firmware, or UEFI compatibility mode (CSM)

Booting

[edit]
See also: UEFI disk device compatibility

When a computer is turned on, its BIOS finds the primary bootable device (usually the computer's hard disk) and runs the initial bootstrap program from the master boot record (MBR). The MBR is the first sector of the hard disk. This bootstrap program must be small because it has to fit in a single sector. For a long time, the size of a sector has been 512 bytes. Since 2009 there are hard disks available with a sector size of 4096 bytes, called Advanced Format disks, but as of October 2013, such hard disks are still accessed in 512-byte sectors, using the 512e emulation.[7] The legacy MBR partition table supports a maximum of four partitions and occupies 64 bytes, combined. Together with the optional disk signature (four bytes) and disk timestamp (six bytes), this leaves between 434 and 446 bytes available for the machine code of a boot loader. Although such a small space can be sufficient for very simple boot loaders,[8] it is not big enough to contain a boot loader supporting complex and multiple file systems, menu-driven selection of boot choices, etc. Boot loaders with bigger footprints are therefore split into pieces, where the smallest piece fits in the MBR, while one or more larger pieces are stored in other locations such as empty sectors between the MBR and the first partition. The code in the MBR then does little more than starting the second part.

The purpose of the remaining part(s) of the boot loader is to actually boot an operating system by configuring it and starting the kernel. Kernels are in most cases stored as files residing on appropriate file systems, but the concept of a file system is unknown to the BIOS. Thus, in BIOS-based systems, the duty of a boot loader is to access the content of those files, so it can be loaded into the RAM and executed.

One possible approach for boot loaders is to load kernel images by directly accessing hard disk sectors without understanding the underlying file system. Usually, an additional level of indirection is required, in form of maps or map files – auxiliary files that contain a list of physical sectors occupied by kernel images. Such maps need to be updated each time a kernel image changes its physical location on disk, due to installing new kernel images, file system defragmentation, etc. Also, in case of the maps changing their physical location, their locations need to be updated within the boot loader's MBR code, so the sectors indirection mechanism continues to work. This is not only cumbersome, but it also leaves the system in need of manual repairs in case something goes wrong during system updates.[9]

Another approach is to make a boot loader aware of the underlying file systems, so kernel images are configured and accessed using their actual file paths. That requires a boot loader to contain a driver for each of the supported file systems, so they can be understood and accessed by the boot loader itself. This approach eliminates the need for hardcoded locations of hard disk sectors and existence of map files, and does not require MBR updates after kernel images are added or moved around. The configuration of a boot loader is stored in a regular file, which is also accessed in a file system-aware way to obtain boot configurations before the actual booting of any kernel images. Thus, fewer things can go wrong during system updates. As a downside, such boot loaders are larger and more complex.[9]

GNU GRUB uses the second approach, by understanding the underlying file systems. The boot loader itself is split into multiple stages so that it fits in the MBR boot scheme.

Two major versions of GRUB are in common use: GRUB version 0, called GRUB legacy, is only prevalent in older releases of Linux distributions. GRUB 2 was written from scratch and intended to replace its predecessor, and is now used by a majority of Linux distributions.

Version 0 (GRUB Legacy)

[edit]
GRUB v1 menu (running as part of Ubuntu 8.04 installation)

GRUB 0.x follows a two-stage approach. The master boot record (MBR) usually contains GRUB stage 1, or can contain a standard MBR implementation which chainloads GRUB stage 1 from the active partition's boot sector. Given the small size of a boot sector (512 bytes), stage 1 can do little more than load the next stage of GRUB by loading a few disk sectors from a fixed location near the start of the disk (within its first 1024 cylinders).

Stage 1 can load stage 2 directly, but it is normally set up to load the stage 1.5., located in the first 30 KiB of hard disk immediately following the MBR and before the first partition. In case this space is not available (unusual partition table, special disk drivers, GPT or LVM disk) the install of stage 1.5 will fail. The stage 1.5 image contains file system drivers, enabling it to directly load stage 2 from any known location in the filesystem, for example from /boot/grub. Stage 2 will then load the default configuration file and any other modules needed.

Version 2 (GRUB 2)

[edit]
GRUB 2 – MBR vs. GPT partitioning and boot sequence visualized (systems using BIOS firmware).

Startup on systems using BIOS firmware

[edit]
  • See illustration in last image on the right.[10]
  • boot.img (stage 1) is written to the first 440 bytes of the Master Boot Record (MBR boot code in sector 0), or optionally in a partition boot sector (PBR). It addresses diskboot.img by a 64-bit LBA address. The actual sector number is written by grub-install. diskboot.img is the first sector of core.img with the sole purpose to load the rest of core.img identified by LBA sector numbers also written by grub-install.
    • On MBR partitioned disks, core.img (stage 1.5) is stored in the empty sectors (if available) between the MBR and the first partition. Recent operating systems suggest a 1 MiB gap here for alignment (2047 512-byte, or 255 4KiB, sectors). This gap used to be 62 sectors (31 KiB) as a reminder of the sector number limit of Cylinder-Head-Sector (C/H/S) addressing used by BIOS before 1996, therefore core.img is designed to be smaller than 32 KiB.
    • On GPT partitioned disks core.img is written to its own partition. It must be flagged "BIOS_grub", must not be formatted and can be as tiny as 1 MiB.
  • stage 2: core.img loads /boot/grub/i386-pc/normal.mod from the partition configured by grub-install. If the partition index has changed, GRUB will be unable to find the normal.mod, and presents the user with the GRUB Rescue prompt.
  • Depending on how GRUB2 was installed, the /boot/grub/ is either in the root partition of the Linux distribution, or in the separate /boot partition.
  • after normal.mod loaded: normal.mod parses /boot/grub/grub.cfg, optionally loads modules (eg. for graphical UI and file system support) and shows the menu.

Startup on systems using UEFI firmware

[edit]
  • /efi/<distro>/grubx64.efi (for x64 UEFI systems) is installed as a file in the EFI System Partition, and booted by the firmware directly, without a boot.img in MBR sector 0. This file is like stage1 and stage1.5.
  • /boot/grub/ can be installed on the EFI System Partition or the separate /boot partition, among others.
  • For x64 UEFI systems, stage2 are the /boot/grub/x86_64-efi/normal.mod file and other /boot/grub/ files.

After startup

[edit]

GRUB presents a menu where the user can choose from operating systems (OS) found by grub-install. GRUB can be configured to automatically load a specified OS after a user-defined timeout. If the timeout is set to zero seconds, pressing and holding ⇧ Shift while the computer is booting makes it possible to access the boot menu.[11]

In the operating system selection menu GRUB accepts a couple of commands:

  • By pressing e, it is possible to edit kernel parameters of the selected menu item before the operating system is started. The reason for doing this in GRUB (i.e. not editing the parameters in an already booted system) can be an emergency case: the system has failed to boot. Using the kernel parameters line it is possible, among other things, to specify a module to be disabled (blacklisted) for the kernel. This could be required if the specific kernel module is broken and thus prevents boot-up. For example, to blacklist the kernel module nvidia-current, one could append modprobe.blacklist=nvidia-current at the end of the kernel parameters.
  • By pressing c, the user enters the GRUB command line. The GRUB command line is not a regular Linux shell, like e.g. bash, and accepts only certain GRUB-specific commands, documented by various Linux distributions.[12]

Once boot options have been selected, GRUB loads the selected kernel into memory and passes control to the kernel. Alternatively, GRUB can pass control of the boot process to another boot loader, using chain loading. This is the method used to load operating systems that do not support the Multiboot Specification or are not supported directly by GRUB.

Identifying partitions (UUID workaround)

[edit]

A computer can have multiple hard disks connected to it. These could be identified via their SATA port. Each time the computer POSTs, the hard disk connected to a specific motherboard port could be assigned the same identifier, for example hd0, hd1, …. But what if such consistency cannot be guaranteed? What if the constellation of connected hard disks changed from one start up to another? What if a hard disk will be connected to another computer?

By entering ls into either the GRUB rescue console (available after loading core.img ) or the GRUB console (available after loading normal.mod) a list of all available hard disks and partitions can be obtained. For example, ls (hd0,5)/) will show numbers that can be assigned to actual hard disks and partitions.

As it cannot be guaranteed that the "hd0"style numbering of hard disks via device numbers is consistent, GNU GRUB can use a Universally Unique Identifier (UUID) to identify partitions (actually file system instances).

The file systems ext2, ext3, ext4 and xfs use a UUID to uniquely identify an instance. The UUID is created when a partition is formatted. The UUID is part of the file system and written to the superblock. All operations other than formatting should leave the UUID unaltered. It is possible to change the UUID or duplicate it by using dd to clone an entire partition.

The file grub.cfg is used to configure GRUB. It contains commands to be executed during each start-up. Without an existing and valid grub.cfg, GRUB will present a prompt.

An absolute minimal grub.cfg might contain only the following two commands (cf. initial ramdisk): 

linux (hd0,1)/kernel/vmlinuz-3.20.1-4 ro  # use the file name "vmlinuz-…" located in the directory /kernel on the first partition of the first hard disk as linux kernel image
initrd (hd0,1)/boot/initrd.img-3.20.1-4   # use the file named "initrd.img–…" located in the directory /boot on the first partition of the first hard disk as initial ramdisk

A fancier grub.cfg will describe a menu to be presented, use multiple colors, and may specify a background picture.

History

[edit]

GRUB was initially developed by Erich Boleyn as part of work on booting the operating system GNU/Hurd, developed by the Free Software Foundation.[13] In 1999, Gordon Matzigkeit and Yoshinori K. Okuji made GRUB an official software package of the GNU Project and opened the development process to the public.[13] As of 2014, the majority of Linux distributions have adopted GNU GRUB 2, as well as other systems such as Sony's PlayStation 4.[14]

Development

[edit]

GRUB version 0 (also known as "GRUB Legacy") is no longer under development and is being phased out.[15] The GNU GRUB developers have switched their focus to GRUB 2,[16] a complete rewrite with goals including making GNU GRUB cleaner, more robust, more portable and more powerful. GRUB 2 started under the name PUPA. PUPA was supported by the Information-technology Promotion Agency (IPA) in Japan. PUPA was integrated into GRUB 2 development around 2002, when GRUB version 0.9x was renamed GRUB Legacy.

Some of the goals of the GRUB 2 project include support for non-x86 platforms, internationalization and localization, non-ASCII characters, dynamic modules, memory management, a scripting mini-language, migrating platform specific (x86) code to platform specific modules, and an object-oriented framework. GNU GRUB version 2.00 was officially released on June 26, 2012.[17][18]

Three of the most widely used Linux distributions use GRUB 2 as their mainstream boot loader.[19][20][21] Ubuntu adopted it as the default boot loader in its 9.10 version of October 2009.[22] Fedora followed suit with Fedora 16 released in November 2011.[23] OpenSUSE adopted GRUB 2 as the default boot loader with its 12.2 release of September 2012.[24] Solaris also adopted GRUB 2 on the x86 platform in the Solaris 11.1 release.[25] Buildroot also uses GNU GRUB for x86 and x86_64 targets.

In late 2015, the exploit of pressing backspace 28 times to bypass the login password was found and quickly fixed.[26][27]

Variants

[edit]

GNU GRUB is free software, so several variants have been created. Some notable ones, which have not been merged into GRUB mainline:

  • OpenSolaris includes a modified GRUB Legacy that supports Solaris VTOC slices, automatic 64-bit kernel selection, and booting from ZFS (with compression and multiple boot environments).[28][29]
  • Google Summer of Code 2008 had a project to support GRUB legacy to boot from ext4 formatted partitions.[30]
  • The Syllable project made a modified version of GRUB to load the system from its AtheOS File System.[31]
  • TrustedGRUB extends GRUB by implementing verification of the system integrity and boot process security, using the Trusted Platform Module (TPM).[32]
  • The Intel BIOS Implementation Test Suite (BITS) provides a GRUB environment for testing BIOSes and in particular their initialization of Intel processors, hardware, and technologies. BITS supports scripting via Python, and includes Python APIs to access various low-level functionality of the hardware platform, including ACPI, CPU and chipset registers, PCI, and PCI Express.[33]
  • GRUB4DOS is a GRUB legacy fork that improves the installation experience on DOS and Microsoft Windows by putting everything besides the GRLDR config in one image file. It can be loaded directly from DOS, or by NTLDR or Windows Boot Manager.[34][35] GRUB4DOS is under active development and as of 2021 supports UEFI.[36]

Utilities

[edit]

GRUB configuration tools

[edit]
StartUp-Manager, a program used to configure GRUB

The setup tools in use by various distributions often include modules to set up GRUB. For example, YaST2 on SUSE Linux and openSUSE distributions and Anaconda on Fedora/RHEL distributions. StartUp-Manager and GRUB Customizer are graphical configuration editors for Debian-based distributions. The development of StartUp-Manager stopped on 6 May 2011 after the lead developer cited personal reasons for not actively developing the program.[37] GRUB Customizer is also available for Arch-based distributions.

For GRUB 2 there are KDE Control Modules.[38][39]

GRLDR ICE is a tiny tool for modifying the default configuration of grldr file for GRUB4DOS.[40]

Boot repair utilities

[edit]

Boot-Repair is a simple graphical tool for recovering from frequent boot-related problems with GRUB and Microsoft Windows bootloader. This application is available under GNU GPL license. Boot-Repair can repair GRUB on multiple Linux distributions including, but not limited to, Debian, Ubuntu, Mint, Fedora, openSUSE, and Arch Linux.

GRUB Customizer

Installer for Windows

[edit]

Grub2Win is a Windows open-source software package. It allows GNU GRUB to boot from a Windows directory. The setup program installs GNU GRUB version 2.12 to an NTFS partition. A Windows GUI application is then used to customize the GRUB boot menu, themes, UEFI boot order, scripts etc. All GNU GRUB scripts and commands are supported for both UEFI and legacy systems. Grub2Win can configure GRUB for multiboot of Windows, Ubuntu, openSuse, Fedora and many other Linux distributions. It is freely available under GNU GPL License at SourceForge.

Alternative boot managers

[edit]
See also: Comparison of bootloaders

The strength of GRUB is the wide range of supported platforms, file systems, and operating systems, making it the default choice for distributions and embedded systems.

However, there are boot managers targeted at the end user that give more friendly user experience, graphical OS selector and simpler configuration:

  • rEFInd – Macintosh-style graphical boot manager, only for UEFI-based computers (BIOS not supported).
  • CloverEFI – Macintosh-style graphical boot manager for BIOS and UEFI-based computers. It emulates UEFI with a heavily modified DUET from the TianoCore project and requires a FAT formatted partition even on BIOS systems. As a benefit, it has a basic filesystem driver in the partition boot sector, avoiding the brittleness of a second or third stage and the infamous GRUB Rescue prompt. The user interface looks similar to rEFInd: both inherit from the abandoned boot manager rEFIt.

Non-graphical alternatives:

  • systemd-boot – Light, UEFI-only boot manager with text-based OS selector menu.
[edit]
Wikimedia Commons has media related to GNU GRUB.
Wikibooks has a book on the topic of: GRUB Installation After Windows Installation

How-Tos and troubleshooting

[edit]

Distribution wikis have many solutions for common issues and custom setups that might help you:

Documentation

[edit]

Introductory articles

[edit]

Technicalities

[edit]

See also

[edit]

Notes

[edit]
  1. ^ GPL-3.0-or-later since 2007-07-21.[4]
  2. ^ GPL-2.0-or-later from 1999 until 2007-07-02.

References

[edit]
  1. ^ Daniel Kiper (December 20, 2023). "GRUB 2.12 released". Retrieved December 20, 2023.
  2. ^ "GRUB 2.12 release candidate 1". July 10, 2023.
  3. ^ "Ohloh Analysis Summary – GNU GRUB". Ohloh. Archived from the original on February 4, 2009. Retrieved May 12, 2010.
  4. ^ "Migrate to GNU General Public License Version 3". July 21, 2007. Archived from the original on October 27, 2021. Retrieved October 27, 2021.
  5. ^ "GNU GRUB license". Archived from the original on September 11, 2013.
  6. ^ EnterpriseLinux.com Definitions Archived December 3, 2010, at the Wayback Machine Definition of GRand Unified Bootloader
  7. ^ Smith, Ryan (December 18, 2009). "Western Digital's Advanced Format: The 4K Sector Transition Begins". AnandTech. Archived from the original on March 12, 2012. Retrieved October 10, 2013.
  8. ^ "mbldr (Master Boot LoaDeR)". mbldr.sourceforge.net. 2009. Archived from the original on March 16, 2013. Retrieved October 10, 2013.
  9. ^ a b "Booting and Boot Managers". SUSE. Archived from the original on September 17, 2013. Retrieved October 10, 2013.
  10. ^ "GNU GRUB Manual 2.04". www.gnu.org. Archived from the original on April 3, 2018. Retrieved November 10, 2020.
  11. ^ Hoffman, Chris (September 22, 2014). "How to Configure the GRUB2 Boot Loader's Settings". HowToGeek.com. Archived from the original on April 28, 2015. Retrieved April 25, 2015.
  12. ^ "GNU GRUB documentation". Archived from the original on April 18, 2014. Retrieved April 16, 2014.
  13. ^ a b GRUB Manual – 1.2 Grub History Archived April 16, 2014, at the Wayback Machine. Gnu.org (2012-06-23). Retrieved on 2012-12-01.
  14. ^ "PS4 runs Orbis OS, a modified version of FreeBSD that's similar to Linux". extremetech.com. June 24, 2013. Archived from the original on November 18, 2020. Retrieved October 23, 2013.
  15. ^ GNU GRUB – GRUB Legacy Archived April 20, 2014, at the Wayback Machine. Gnu.org. Retrieved on 2012-12-01.
  16. ^ "GNU GRUB – GRUB 2". Archived from the original on June 7, 2008. Retrieved April 18, 2014.{{cite web}}: CS1 maint: bot: original URL status unknown (link).
  17. ^ Serbinenko, Vladimir (June 28, 2012). "GRUB 2.00 released". grub-devel (Mailing list). Archived from the original on January 13, 2013. Retrieved December 1, 2012.
  18. ^ Larabel, Michael. "GRUB 2.00 Boot-Loader Officially Released". Phoronix.com. Archived from the original on September 13, 2016. Retrieved June 28, 2012.
  19. ^ Haddon, Tom (January 26, 2012). "An Introduction to Ubuntu". WebJunction. Archived from the original on October 28, 2012. Retrieved September 21, 2012.
  20. ^ Janssen, Cory. "What is Red Hat Enterprise Linux (RHEL)?". Technopedia. Archived from the original on October 3, 2012. Retrieved September 21, 2012.
  21. ^ Varghese, Sam (September 20, 2012). "SUSE chief lists progress since privatisation". Archived from the original on September 22, 2012. Retrieved September 21, 2012.
  22. ^ "9.10 Karmic GRUB version". Distrowatch.com. Archived from the original on May 9, 2012. Retrieved July 8, 2012.
  23. ^ GRUB 2 Archived August 5, 2012, at the Wayback Machine. FedoraProject. Retrieved on 2012-12-01.
  24. ^ openSUSE:Upcoming features – openSUSE Archived September 20, 2012, at the Wayback Machine. En.opensuse.org. Retrieved on 2012-12-01.
  25. ^ Solaris 11.1 Archived June 19, 2018, at the Wayback Machine. Oracle Retrieved 2015-03-19.
  26. ^ Khandelwal, Swati (December 16, 2015). "You can Hack into a Linux Computer just by pressing 'Backspace' 28 times". thehackernews.com. Archived from the original on April 30, 2017. Retrieved March 13, 2017.
  27. ^ Marco and, Hector; Ripoll, Ismael (December 2015). "Back to 28: Grub2 Authentication 0-Day". Archived from the original on May 17, 2017. Retrieved March 13, 2017.
  28. ^ x86: Modifying Boot Behavior by Editing the GRUB Menu at Boot Time Archived July 19, 2011, at the Wayback Machine, Modifying Solaris Boot Behavior on x86 Based Systems (Task Map) – System Administration Guide: Basic Administration
  29. ^ x86: Supported GRUB Implementations Archived October 21, 2009, at the Wayback Machine, (System Administration Guide: Basic Administration) – Sun Microsystems
  30. ^ Peng, Tao. "Grub4ext4". Archived from the original on December 31, 2016. Retrieved June 13, 2017.
  31. ^ 2.3 Why does Syllable have its own version of GRUB? Archived January 7, 2011, at the Wayback Machine, Syllable Documentation
  32. ^ "TrustedGRUB project". sourceforge.net. June 5, 2013. Archived from the original on November 29, 2014. Retrieved November 18, 2014.
  33. ^ BIOS Implementation Test Suite Archived October 19, 2016, at the Wayback Machine, Official BITS website
  34. ^ "grub4dos". Google Site. Archived from the original on April 7, 2019. Retrieved April 7, 2019.
  35. ^ "GRUB for DOS Introduction". grub4dos.sourceforge.net. 2007. Archived from the original on April 7, 2019. Retrieved April 7, 2019.
  36. ^ grub4dos on GitHub
  37. ^ "StartUp-Manager is dead : StartUp-Manager". launchpad.net. May 6, 2011. Archived from the original on August 1, 2020. Retrieved April 9, 2017.
  38. ^ GRUB2 Bootloader Editor Archived September 7, 2015, at the Wayback Machine. Kde-apps.org (2012-06-18). Retrieved on 2012-12-01.
  39. ^ "Grub2 KCM". KDE-Apps.org. Archived from the original on September 6, 2015. Retrieved January 27, 2011.
  40. ^ "Grub4dos tutorial". Narod.ru. Archived from the original on May 3, 2015. Retrieved April 25, 2015.
Retrieved from "http://en.wiki.x.io/w/index.php?title=GNU_GRUB&oldid=1255212178"