Intel DX4
![](http://up.wiki.x.io/wikipedia/commons/thumb/7/77/Intel_i486_dx4_100mhz_2007_03_27.jpg/220px-Intel_i486_dx4_100mhz_2007_03_27.jpg)
![](http://up.wiki.x.io/wikipedia/commons/thumb/a/a5/Voltage_converter_for_80486_dx4_processors_2007_03_27.jpg/220px-Voltage_converter_for_80486_dx4_processors_2007_03_27.jpg)
![](http://up.wiki.x.io/wikipedia/commons/thumb/d/db/FC80486DX4-75_AK_SX883_USA_1995_01_WT.jpg/220px-FC80486DX4-75_AK_SX883_USA_1995_01_WT.jpg)
![](http://up.wiki.x.io/wikipedia/commons/thumb/3/35/KL_Intel_Overdrive_DX40DPR100.jpg/220px-KL_Intel_Overdrive_DX40DPR100.jpg)
IntelDX4 is a clock-tripled i486 microprocessor with 16 KB level 1 cache.[1] Intel named it DX4 (rather than DX3) as a consequence of litigation with AMD over trademarks. The product was officially named IntelDX4, but OEMs continued using the i486 naming convention.
Intel produced IntelDX4s with two clock speed steppings: A 75-MHz version (3× 25 MHz multiplier), and a 100-MHz version (3× 33.3 MHz). Both chips were released in March 1994. A version of IntelDX4 featuring write-back cache was released in October 1994. The original write-through versions of the chip are marked with a laser-embossed “&E,” while the write-back-enabled versions are marked “&EW.” i486 OverDrive editions of IntelDX4 had locked multipliers, and therefore can only run at 3× the external clock speed. The 100-MHz model of the processor had an iCOMP rating of 435, while the 75-MHz processor had a rating of 319. IntelDX4 was an OEM-only product, but the DX4 Overdrive could be purchased at a retail store.
The IntelDX4 microprocessor is mostly pin-compatible with the 80486, but requires a lower 3.3-V supply. Normal 80486 and DX2 processors use a 5-V supply; plugging a DX4 into an unmodified socket will destroy the processor. Motherboards lacking support for the 3.3-V CPUs can sometimes make use of them using a voltage regulator module (VRM) that fits between the socket and the CPU. The DX4 OverDrive CPUs have VRMs built in.
Specifications
[edit]Processor speed (MHz) | Input clock (MHz) and multiplier | Voltage (nominal) (V) | Voltage range (V) | Part number | Sspec number |
---|---|---|---|---|---|
75 | 25 × 3 | 3.3 | 3.1–3.6 | FC80486DX4-75 | SK052, SX883 |
75 | 25 × 3 | 3.3 | 3.1–3.6 | A80486DX4-75 | SK047, SX884 |
75 | 25 × 3 | 3.3 | 3.1–3.5 | A80486DX4WB-75 | SK102 |
75 | 25 × 3 | 3.3 | 3.1–3.5 | FC80486DX4WB-75 | SK100 |
100 | 33 × 3 | 3.3, 3.45 | 3.1–3.6 | FC80486DX4-100 | SX906 |
100 | 33 × 3 | 3.45 | 3.3–3.6 | A80486DX4-100 | SK051, SX900 |
100 | 33 × 3 | 3.45 | 3.3–3.6 | A80486DX4WB-100 | SK096 |
100 | 33 × 3, 50 × 2 | 3.45 | 3.3–3.6 | FC80486DX4-100 | SX876 |
100 | 33 × 3, 50 × 2 | 3.3, 3.45 | 3.1–3.6 | FC80486DX4-100 | SK053 |
100 | 33 × 3, 50 × 2 | 3.45 | 3.3–3.6 | A80486DX4-100 | SX877 |
100 | 33 × 3, 50 × 2 | 3.3 | 3.1–3.6 | A80486DX4-100 | SK050 |
100 | 33 × 3, 50 × 2 | 3.3 | 3.1–3.6 | A80486DX4WB-100 | Limited availability |
100 | 33 × 3, 50 × 2 | 3.3 | 3.1–3.6 | FC80486DX4WB-100 | SK099 |