Jump to content

Cobalt(III) fluoride

From Wikipedia, the free encyclopedia
(Redirected from Cobalt trifluoride)
Cobalt(III) fluoride
Cobalt(III) fluoride
Names
Other names
Cobalt trifluoride
Cobaltic fluoride
Cobalt fluoride
Cobaltic trifluoride
Identifiers
3D model (JSmol)
ChemSpider
ECHA InfoCard 100.030.045 Edit this at Wikidata
EC Number
  • 233-062-4
UNII
  • InChI=1S/Co.3FH/h;3*1H/q+3;;;/p-3 checkY
    Key: WZJQNLGQTOCWDS-UHFFFAOYSA-K checkY
  • InChI=1/Co.3FH/h;3*1H/q+3;;;/p-3
    Key: WZJQNLGQTOCWDS-DFZHHIFOAL
  • F[Co](F)F
Properties
CoF3
Molar mass 115.928 g/mol
Appearance brown powder
Density 3.88 g/cm3
Melting point 927 °C (1,701 °F; 1,200 K)
reacts
+1900.0·10−6 cm3/mol
Structure
hexagonal
Hazards
NFPA 704 (fire diamond)
NFPA 704 four-colored diamondHealth 3: Short exposure could cause serious temporary or residual injury. E.g. chlorine gasFlammability 0: Will not burn. E.g. waterInstability 2: Undergoes violent chemical change at elevated temperatures and pressures, reacts violently with water, or may form explosive mixtures with water. E.g. white phosphorusSpecial hazards (white): no code
3
0
2
Related compounds
Other anions
cobalt(III) oxide, cobalt(III) chloride
Other cations
iron(III) fluoride, rhodium(III) fluoride
Related compounds
cobalt(II) fluoride
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is checkY☒N ?)

Cobalt(III) fluoride is the inorganic compound with the formula CoF3. Hydrates are also known. The anhydrous compound is a hygroscopic brown solid. It is used to synthesize organofluorine compounds.[1]

The related cobalt(III) chloride is also known but is extremely unstable.[2] Cobalt(III) bromide and cobalt(III) iodide have not been synthesized.

Structure

[edit]

Anhydrous

[edit]

Anhydrous cobalt trifluoride crystallizes in the rhombohedral group, specifically according to the aluminium trifluoride motif, with a = 527.9 pm, α = 56.97°. Each cobalt atom is bound to six fluorine atoms in octahedral geometry, with Co–F distances of 189 pm. Each fluoride is a doubly bridging ligand.[3]

Hydrates

[edit]

A hydrate CoF3·3.5H2O is known. It is conjectured to be better described as [CoF3(H2O)3]·0.5H2O.[3]

There is a report of an hydrate CoF3·3.5H2O, isomorphic to AlF3·3H2O.[3]

Preparation

[edit]

Cobalt trifluoride can be prepared in the laboratory by treating CoCl2 with fluorine at 250 °C:[4][3]

CoCl2 + 3/2 F2CoF3 + Cl2

In this redox reaction, Co2+ and Cl are oxidized to Co3+ and Cl2, respectively, while F2 is reduced to F. Cobalt(II) oxide (CoO) and cobalt(II) fluoride (CoF2) can also be converted to cobalt(III) fluoride using fluorine.[3]

The compound can also be formed by treating CoCl2 with chlorine trifluoride ClF3 or bromine trifluoride BrF3.[3]

Reactions

[edit]

CoF3 decomposes upon contact with water to give oxygen:

4 CoF3 + 2 H2O → 4 HF + 4 CoF2 + O2

It reacts with fluoride salts to give the anion [CoF6]3−, which is also features high-spin, octahedral cobalt(III) center.

Applications

[edit]

CoF3 is a powerful fluorinating agent. Used as slurry, CoF3 converts hydrocarbons to the perfluorocarbons:

2 CoF3 + R-H → 2 CoF2 + R-F + HF

CoF2 is the byproduct.

Such reactions are sometimes accompanied by rearrangements or other reactions.[1] The related reagent KCoF4 is more selective.[5]

Gaseous CoF3

[edit]

In the gas phase, CoF3 is calculated to be planar in its ground state, and has a 3-fold rotation axis (point group D3h). The Co3+ ion has a ground state of 3d6 5D. The fluoride ligands split this state into, in energy order, 5A', 5E", and 5E' states. The first energy difference is small and the 5E" state is subject to the Jahn-Teller effect, so this effect needs to be considered to be sure of the ground state. The energy lowering is small and does not change the energy order.[6] This calculation was the first treatment of the Jahn-Teller effect using calculated energy surfaces.

References

[edit]
  1. ^ a b Coe, P. L. (2004). "Cobalt(III) Fluoride". Encyclopedia of Reagents for Organic Synthesis. J. Wiley. doi:10.1002/047084289X.rc185. ISBN 0471936235.
  2. ^ Arthur W. Chester, El-Ahmadi Heiba, Ralph M. Dessau, and William J. Koehl Jr. (1969): "The interaction of cobalt(III) with chloride ion in acetic acid". Inorganic and Nuclear Chemistry Letters, volume 5, issue 4, pages 277-283. doi:10.1016/0020-1650(69)80198-4
  3. ^ a b c d e f W. Levason and C. A. McAuliffe (1974): "Higher oxidation state chemistry of iron, cobalt, and nickel". Coordination Chemistry Reviews, volume 12, issue 2, pages 151-184. doi:10.1016/S0010-8545(00)82026-3
  4. ^ H. F. Priest (1950): "Anhydrous Metal Fluorides". In Inorganic Syntheses, McGraw-Hill, volume 3, pages 171-183. doi:10.1002/9780470132340.ch47
  5. ^ Coe, P. L. "Potassium Tetrafluorocobaltate(III)" in Encyclopedia of Reagents for Organic Synthesis (Ed: L. Paquette) 2004, J. Wiley & Sons, New York. doi:10.1002/047084289X.rp251.
  6. ^ Yates, J. H.; Pitzer, R. M. (1979). "Molecular and Electronic Structure of Transition Metal Trifluorides". J. Chem. Phys. 70 (9): 4049–4055. Bibcode:1979JChPh..70.4049Y. doi:10.1063/1.438027.
[edit]